Skip to main content

Refining

Documents marked with an asterisk (*) are expected to be published in 2017.

  • Recommended Practice 505, Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1 and Zone 2, 2nd edition
  • API 510 Pressure Vessel Inspection Code, 10th edition, 2014, Addendum 1
  • Recommended Practice 534, Heat Recovery Steam Generators, 3rd edition
  • Recommended Practice 545, Lightning Protection for Aboveground Storage Tanks, 2nd edition
  • Standard 561, Reforming Furnaces for Hydrogen and Syngas Production, 1st edition
  • Recommended Practice 565, Reactor Furnaces in Sulfur Recovery Units for General Refinery Service, 1st edition
  • *Standard 598, Valve Inspection and Testing, 10th edition
  • *Standard 618, Reciprocating Compressors for Petroleum, Chemical and Gas Industry Services, 6th edition
  • *Standard 620-A2, Addendum 2 to Design and Construction of Large, Welded, Low-pressure Storage Tanks, 12th edition
  • *Standard 625-A3, Addendum 3 to Tank Systems for Refrigerated Liquefied Gas Storage, 1st edition
  • *Standard 653-A1, Addendum 1 to Tank Inspection, Repair, Alteration, and Reconstruction, 5th edition
  • Standard 667, Plate and Frame Heat Exchangers for General Refinery Services, 1st edition
  • Standard 668, Brazed Aluminum Plate-fin Heat Exchangers for General Refinery Services, 1st edition
  • Standard 669, Heat Recovery Systems, 1st edition
  • *Standard 672, Packaged, Integrally Geared Centrifugal Air Compressors for Petroleum, Chemical, and Gas Industry Services, 5th edition
  • *Standard 681, Liquid Ring Vacuum Pumps and Compressors, 2nd edition
  • Standard 682, Pumps—Shaft Sealing Systems for Centrifugal and Rotary Pumps 5th edition
  • *Technical Report 684, Tutorial on the API Standard Paragraphs Covering Rotor Dynamics and Balance (An Introduction to Lateral Critical and Train Torsional Analysis and Rotor Balancing), 3rd edition
  • Recommended Practice 687, Rotor Repair, 2nd edition
  • *Standard 692, Compressor Dry Gas Seals, 1st edition
  • Standard 810, Welded Plate-block Heat Exchangers, 1st edition
  • Recommended Practice 934-A, Materials and Fabrication Requirements for 2-1/4/3Cr Alloy Steel Heavy Wall Pressure Vessels for High Temperature, High Pressure Hydrogen Service, 3rd edition
  • Recommended Practice 934-C, Materials and Fabrication of 1-1/4CR - 1/2Mo Steel Heavy Wall Pressure Vessels for High Pressure Hydrogen Service Operating at or Below 825°F (441°C), 2nd edition
  • Recommended Practice 934-E, Materials and Fabrication of 1¼Cr-½Mo Steel Pressure Vessels for Service Above 825 °F (440 °C), 2nd edition
  • Recommended Practice 934-F, Minimum Pressurization Temperatures, MPT, for Heavy Wall Pressure Vessels, 1st edition
  • Recommended Practice 934-H, Maintenance Unique to 2¼Cr-1Mo and 2¼Cr-1Mo-V Steel Pressure Vessels in High Pressure, High Temperature Hydrogen-Containing Service, 1st edition
  • Recommended Practice 934-I, Periodic Inspection of 2¼Cr-1Mo and 2¼Cr-1Mo-V Steel Pressure Vessels in High Pressure, High Temperature Hydrogen-Containing Service, 1st edition
  • Technical Report 934-J, Coke Drum Repair, 1st edition
  • Recommended Practice 939-C, Guidelines for Avoiding Sulfidation (Sulfidic) Corrosion Failures in Oil Refineries, 2nd edition
  • *Recommended Practice 941, Steels for Hydrogen Service at Elevated Temperatures and Pressures in Petroleum Refineries and Petrochemical Plants, 8th edition
  • Technical Report 941-A1, Addendum 1 to The Technical Basis Document for API RP 941, 1st edition
  • Recommended Practice 945, Avoiding Environmental Cracking in Amine Units, 4th edition
  • Recommended Practice 970, Work Process for Development of Corrosion Control Documents, 1st edition
  • Standard 975, Refractory Installation Quality Control – Inspection & Testing of Refractory Brick Linings and Materials, 1st edition
  • Standard 976, Refractory Installation Quality Control – Inspection & Testing of Refractory Ceramic Fiber Linings and Materials, 1st edition
  • Technical Report 977, Test Variables for Erosion Resistant Refractories in Petrochemical Applications, 1st edition
  • Bulletin 978, Monolithic Refractories Manufacture, Properties and Selection, 1st edition
  • Bulletin 979, Applications of Refractory Lining Materials, 1st edition
  • *Standard 2015, Requirements for Safe Entry and Cleaning of Petroleum Storage Tanks, 8th edition
  • Recommended Practice 2027, Ignition Hazards and Safe Work Practices for Abrasive Blasting of Atmospheric Storage Tanks in Hydrocarbon Service, 4th edition
  • Standard 2510, Design and Construction of LPG Installations, 9th edition
  • Standard 2610, Design, Construction, Operation, Maintenance, and Inspection of Terminal and Tank Facilities, 3rd edition

For Further Information Contact: Steve Crimaudo, Standards Department, email: crimaudos@api.org