Skip to main content

Annual Standards Plan

Below is a list of projected updated standards by industry segment.


Committee Publication Type Publication Number Title Edition Pre-Ballot Phase Ballot Phase In Editing
COSFP RP 2001 Fire Protection in Refineries 1 x
COSFP RP 2009 Safe Welding, Cutting and Hot Work Practices in the Petroleum and Petrochemical Industries 8 x
COSFP RP 2201 Safe Hot Tapping Practices in the Petroleum and Petrochemical Industries 6 x
CRE RP 505 Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1 and Zone 2 2 x
CRE RP 581 Risk-Based Inspection Methodology 4 x
CRE Std 603 Corrosion-Resistant, Bolted Bonnet Gate Valves--Flanged and Butt-Welding Ends 9 x
CRE Std 672 Packaged, Integrally Geared Centrifugal Air Compressors for Petroleum, Chemical, and Gas Industry Services 5 x
CRE TR 684 Tutorial on the API Standard Paragraphs Covering Rotor Dynamics and Balance 3 x
CRE RP 751 Safe Operation of Hydrofluoric Acid Alkylation Units 5 x
CRE RP 755 Fatigue Risk Management Systems for Personnel in the Refining and Petrochemical Industries 2 x
CRE TR 979 Applications of Refractory Lining Materials 1 x
CRE RP 12R1 Recommended Practice for Setting, Maintenance, Inspection, Operation, and Repair of Tanks in Production Service 6 x
CRE Std 620-A3 Addendum 3 to Design and Construction of Large, Welded, Low-Pressure Storage Tanks 12 x
CRE Std 625 Tank Systems for Refrigerated Liquefied Gas Storage 2 x x
 CRE  Std 650-A3 Addendum 3 to Welded Tanks for Oil Storage 12     x
 CRE Std 653-A2  Addendum 2 to Tank Inspection, Repair, Alteration and Recontruction 5 x    
CRE Std 685-A1 Sealless Centrifugal Pumps for Petroleum, Petrochemical, and Gas Industry Services 2 x
CRE RP 934-A Materials and Fabrication of 2 ¼Cr-1Mo, 2 ¼Cr-1Mo-¼V, 3Cr-1Mo, and 3Cr-1Mo-¼V Steel Heavy Wall Pressure Vessels for High-temperature, High-pressure Hydrogen Service 3 x
CRE RP 500 Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2 (includes Errata dated January 2014) 4 x
 CRE Std 510 Pressure Vessel Inspection Code  10 x    
CRE Std 521 Guide for Pressure-relieving and Depressuring Systems 7
x
CRE Std 527 Seat Tightness of Pressure Relief Valves 5
x
CRE Std 530 Calculation of Heater-tube Thickness in Petroleum Refineries 8
x
CRE Std 534 Heat Recovery Steam Generators 3 x
CRE Std 535 Burners for Fired Heaters in General Refinery Services 4 x
 CRE Std 537-A1 Addendum 1 to Flare Details for Petroleum, Petrochemical and Natural Gas Industries 3 x    
CRE Std 538 Industrial Fired Boilers for General Refinery Service 2 x
CRE RP 540 Electrical Installations in Petroleum Processing Plants 5 x
CRE RP 545 Lightning Protection for Aboveground Storage Tanks 2 x
CRE Std 546 Brushless Synchronous Machines 500 kVA and Larger 4 x
CRE RP 552 Transmission Systems 2 x
CRE RP 553 Refinery Valves and Accessories for Control and Safety Instrumented Systems 3 x
CRE RP 554 Part 1 Process Control Systems, Part 1: Process Control Systems Functions and Funtional Specification Development 3 x
CRE RP 554 Part 2 Process Control Systems, Part 2: Process Control, System Design 2 x
CRE RP 554 Part 3 Process Control Systems, Part 3: Project Execution and Process Control System Ownership 2 x
CRE API 555 Process Analyzers 4 x
CRE RP 556 Instrumentation, Control, and Protective Systems for Gas Fired Heaters 3 x
CRE Std 561 Reforming Furnaces for Hydrogen and Syngas Production 1 x
CRE Std 565 Thermal Reactors in Sulfur Recovery Units for General Refinery Service 1 x
CRE RP 571 Damage Mechanisms Affecting Fixed Equipment in the Refining Industry 3 x
CRE RP 572 Inspection Practices for Pressure Vessels 5
x
CRE RP 573 Inspection of Fired Boilers and Heaters 4
x
CRE RP 575 Inspection of Atmospheric & Low Pressure Storage Tanks 4 x
CRE RP 577 Welding Processes, Inspection, and Metallurgy 3 x
 CRE RP 578 Material Verification Program for New and Existing Alloy Piping Systems  4 x    
CRE RP 582 Welding Guidelines for the Chemical, Oil, and Gas Industries 4 x
CRE RP 583 Corrosion Under Insulation and Fireproofing 2 x
CRE RP 584 Integrity Operating Windows 2 x
 CRE RP 585 Pressure Equipment Integrity Incident Investigation  2 x    
CRE RP 591 Process Valve Qualification Procedure 6 x
CRE RP 599 Metal Plug Valves -- Flanged and Butt-welding Ends, Bolted Bonnets 8 x
CRE Std 600 Steel Gate Valves - Flanged and Butt-welding Ends, Bolted Bonnets 14 x
CRE Std 602 Gate, Globe, and Check Valves for Sizes DN 100 (NPS 4) and Smaller for the Petroleum and Natural Gas Industries 11 x
CRE Std 608 Metal Ball Valves--Flanged, Threaded and Butt-Welding Ends 6 x
CRE Std 610 Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries 12 x
CRE Std 611 General Purpose Steam Turbines for Petroleum, Chemical, and Gas Industry Services 6 x
CRE Std 612 Petroleum, petrochemical and natural gas industries—Steam turbines—Special-purpose applications 8 x
CRE Std 613 Special Purpose Gear Units for Petroleum, Chemical and Gas Industry Services 6 x
CRE Std 614 Lubrication, Shaft-Sealing, and Control-Oil Systems and Auxiliaries for Petroleum, Chemical and Gas Industry Services 6 x
CRE RP 615 Valve Selection Guide 3 x
CRE Std 616 Gas Turbines for the Petroleum, Chemical and Gas Industry Services 6 x
CRE Std 617 Axial and Centrifugal Compressors and Expander-compressors for Petroleum, Chemical and Gas Industry Services 9 x
CRE Std 618 Reciprocating Compressors for Petroleum, Chemical and Gas Industry Services 6 x
CRE RP 621 Reconditioning of Metallic Gate, Globe, and Check Valves 4 x
CRE Std 622 Type Testing of Process Valve Packing for Fugitive Emissions 2 x
CRE Std 623 Steel Globe Valves—Flanged and Butt-welding Ends, Bolted Bonnets 2 x
CRE Std 624 Type Testing of Rising Stem Valves Equipped with Flexible Graphite Packing for Fugitive Emissions 2 x
CRE RP 651 Cathodic Protection of Aboveground Storage Tanks 5 x
CRE RP 652 Linings of Aboveground Petroleum Storage Tank Bottoms 5 x
 CRE TR 654 Caulking or Sealing the Bottom Edge Projection to the Foundation 1 x    
CRE Std 660 Shell-and-Tube Heat Exchangers 10 x
CRE Std 661 Petroleum, Petrochemical, and Natural Gas Industries—Air-Cooled Heat Exchangers for General Refinery Service 8 x
 CRE Std 663 Hairpin-Type Heat Exchangers 2 x    
CRE Std 664 Spiral Plate Heat Exchangers 2 x
CRE Std 667 Plate and Frame Heat Exchangers for General Refinery Services (Formerly Std. 662, Part 1) 1 x
CRE Std 668 Brazed Aluminum Plate-fin Heat Exchangers for General Refinery Services (Formerly Std. 662, Part 2) 1 x
CRE Std 669 Heat Recovery Systems 1 x
CRE Std 671 Special Purpose Couplings for Petroleum, Chemical and Gas Industry Services 5 x
CRE Std 673 Centrifugal Fans for Petroleum, Chemical and Gas Industry Services 4 x
CRE Std 676 Positive Displacement Pumps - Rotary 4 x
CRE Std 677 General Purpose Gears, Slow Speed (Extruder) gears, and Epicyclic gear units for Petroleum, Chemical, and Gas Industry Services 4 x
CRE Std 681 Liquid Ring Vacuum Pumps and Compressors 2 x
CRE Std 682 Pumps—Shaft Sealing Systems for Centrifugal and Rotary Pumps 5 x
CRE Std 685 Sealless Centrifugal Pumps for Petroleum, Petrochemical, and Gas Industry Services 3 x
CRE RP 686 Machinery Installation and Installation Design 3 x
CRE RP 687 Rotor Repair 2 x
CRE RP 688 Pulsation and Vibration Control in Positive Displacement Machinery Systems for Petroleum, Petrochemical, and Natural Gas Industry Services 2 x
CRE Std 697 Pump Repair 1 x
CRE RP 755 Fatigue Prevention Guidelines for the Refining and Petrochemical Industries 2 x
CRE Std 810 Welded Plate-Block Heat Exchangers 1 x
CRE RP 941 Steels for Hydrogen Service at Elevated Temperatures and Pressures in Petroleum Refineries and Petrochemical Plants 9 x
 CRE TR 941-A1 Addendum 1 to the Technical Basis Document for API RP 941 1     x
CRE RP 945 Avoiding Environmental Cracking in Amine Units 4 x
CRE Std 975 Refractory Installation Quality Control – Inspection and Testing of Refractory Brick Systems and Materials 1
x
 CRE TR 978 Monolithic Refractories: Manufacture, Properties and Selection 1     x
CRE TR 981 Comparison of ASTM C832 and DIN EN 993-9 1 x
CRE Std 2000 Venting Atmospheric and Low-pressure Storage Tanks 8 x
CRE RP 2027 Ignition Hazards Involved in Abrasive Blasting of Atmospheric Storage Tanks in Hydrocarbon Service 4
x
CRE RP 2350 Overfill Protection for Storage Tanks in Petroleum Facilities 5 x
CRE RP 2510 Design and Construction of LPG Installations 9 x
CRE Std 2610 Design, Construction, Operation, Maintenance and Inspection of Terminal and Tank Facilities 3
x
 CRE Spec 12B Specification for Bolted Tanks for Storage of Production Liquids 17 x    
CRE Spec 12F Specification for Shop Welded Tanks for Storage of Production Liquids 13 x
CRE Std 520 Pt 1 Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries--Part 1, Sizing and Selection 10
x
CRE Std 520 Pt 2 Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries, Part II, & Installation 7 x
CRE RP 554 Part 1 Process Control Systems, Part 1: Process Control Systems Functions and Functional Specification Development 3 x
CRE RP 554-Part 2 Process Control Systems-Process Control System Design 2 x
CRE RP 554-Part 3 Process Control Systems-Project Execution and Process Control System Ownership 2 x
CRE Std 560-A1 Addendum 1 to Fired Heaters for General Refinery Services 5
x
CRE RP 932-B Design, Materials, Fabrication, Operation, and Inspection Guidelines for Corrosion Control in Hydroprocessing Reactor Effluent Air Cooler (REAC) Systems 3
x
CRE RP 934-C Materials and Fabrication of 1-1/4CR-1/2Mo Steel Heavy Wall Pressure Vessels for High Pressure Hydrogen Service Operating at or Below 825 Deg. F (441 Deg. C) 2
x
CRE RP 934-F Minimum Pressurization Temperatures, MPT, for Heavy Wall Pressure Vessels 1 x
CRE TR 934-H Maintenance and Inspection of 2-1/4Cr-1Mo and 2-1/4Cr-1Mo-V Steel Pressure Vessels in High Pressure, High Temperature Hydrogen-Containing Service 1 x
CRE TR 934-J Coke Drum Repair 1 x
CRE RP 939-C Guidelines for Avoiding Sulfidation (Sulfidic) Corrosion Failures in Oil Refineries 2
x
GCM RP 1604 Closure of Underground Petroleum Storage Tanks 4 x
 GCM  RP 1637 Using the API Color-Symbol System to Mark Equipment and Vehicles for Product Identification at Gasoline Dispensing Facilities and Distribution Terminals. 4 x    
Committee Publication Type Publication Number Title Edition Pre-Ballot Phase Ballot Phase In Editing
COPM Ch. 18.1 Measurement Procedures for Crude Oil Gathered from Small Tanks by Truck 3 x
COPM Ch. 22.4 Testing Protocols—Pressure, Differential Pressure, and Temperature Measuring Devices 1 x
COPM TR 2577 Measurement of Liquid Hydrocarbons by Vortex Meters 1 x
COPM Ch. 11.2.4 Temperature Correction for the Volume of NGL and LPG Tables 23E, 24E, 53E, 59E, 60E 2 x
COPM Ch. 14.3.4 Concentric, Square-Edged Orifice Meters, Part 4—Background, Development, Implementation Procedures and Subroutine Documentation 4 x
COPM Ch. 4.2 Displacement Provers 4 x
COPM Ch. 4.6 Pulse Interpolation 3 x
COPM Ch. 4.8 Operation of Proving Systems 3
x
COPM Ch. 5.6 Measurement of Liquid Hydrocarbons by Coriolis Meters(ANSI/API MPMS 5.6-2002) 2 x
COPM Ch. 5.8 Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters 3 x
COPM Ch. 8.3 Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products 2 x
COPM Ch. 10.7 Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration (ANSI/ASTM D4377) 3 x
COPM Ch. 12.2 Calculation of Liquid Petroleum Quantities Measured by Turbine or Displacement Meters (incorporates Chapters 12.2.1, 12.2.2, 12.2.3, 12.2.4 and 12.2.5) 2 x
COPM Ch. 14.10 Measurement of Flow to Flares 2 x
COPM Ch. 15.2 Guidelines for the Use of Petroleum Industry Specific International System (SI) Units 1 x
COPM Ch. 17.14 Part 1 Measurement of Bulk Cargoes by Draft Survey Part 1: Ocean Going Vessels 1
x
COPM Ch. 17.2 Measurement of Cargoes on Board Tank Vessels 3 x
COPM Ch. 17.5 Guidelines for Cargo Analysis and Reconciliation 4 x
COPM Ch. 17.9 Vessel Experience Factor (VEF) 3 x
COPM Ch. 19.2 Evaporative Loss from Floating-Roof Tanks (previously Publications 2517 and 2519) 4 x
COPM Ch. 20.1 Production Measurement and Allocation Systems 2 x
COPM Ch. 20.3 Measurement of Multiphase Flow 2 x
COPM Ch. 21.2 Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters 2 x
COPM Ch. 22.1 Testing Protocols—General Guidelines for Developing Testing Protocols for Devices Used in the Measurement of Hydrocarbon Fluids- Addendum 1 2
x
COPM Ch. 22.5 Testing Protocols & Electronic Flow Computer Calculations 1 x
COPM Ch. 23.2 Reconciliation of Liquid Pipeline Quantities 1 x
COPM Std 2554 Measurement and Calibration of Tank Cars 2 x
COPM TR 2571 Fuel Gas Measurement 2 x
COPM Ch. 11.1-A2 Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils(includes Addendum dated September 2007) - Addendum 2 2
x
COPM Ch. 11.3.3 Miscellaneous Hydrocarbon Product Properties - Denatured Ethanol Density and Volume Correction Factors 3
x
COPM Ch. 11.3.4 Gasoline/Ethanol Volume Correction Factors 1
x
COPM Ch. 11.4.1 Properties of Reference Materials, Part 1 - Density of Water and Water Volume Correction factors for Calibration of Volumetric Provers 2 x
COPM Ch. 12.1.1 Calculation of Static Petroleum Quantities, Part 1—Upright Cylindrical Tanks and Marine Vessels- Addenda 1 3
x
COPM Ch. 12.4.1 Calculation of Petroleum – Base Prover Quantity Calibration – Waterdraw Method 1 x
COPM Ch. 12.4.2 Calculation of Petroleum – Base Prover Quantity Calibration – Master Meter Method 1 x
COPM Ch. 12.4.3 Calculation of Petroleum – Prover Quantity Calibration – Gravimetric Method 1 x
COPM Ch. 17.14.2 Measurement of Bulk Cargoes by Draft Survey Part 2: Inland Barges 1 x
COPM Ch. 19.6.2 Evaporative Loss from the Cleaning of Storage Tanks 1 x
COPM Ch. 2.2A Measurement and Calibration of Upright Cylindrical Tanks by the Manual Strapping Method 2 x
COPM Ch. 4.9.1 Methods of Calibration for Displacement and Volumetric Tank Provers, Part 1—Introduction to the Determination of the Volume of Displacement and Tank Provers 2 x
COPM Ch. 6.1A Liquid Flow Measurement Systems for Single Phase Liquids – General Considerations 1 x
COPM Ch. 6.2A Truck and Rail Loading/Unloading Measurement Systems 1 x
COPM Ch. 6.3A Pipeline and Marine Loading and Unloading Measurement Systems 1 x
COPS RP 1115 Operation & Design of Solution-mined Underground Storage Facilities 2
x
COPS Std 1160 Managing System Integrity for Hazardous Liquid Pipelines 3 x
COPS RP 1161 Pipeline Operator Qualification 4
x
COPS RP 1162 Public Awareness Programs for Pipeline Operators 3 x
COPS Std 1163 In-line Inspection Systems Qualification 3 x
COPS Std 1164 Pipeline SCADA Security 3 x
COPS RP 1165 Pipeline SCADA Displays 2 x
COPS TR 1179 Hydrostatic Testing as an Integrity Management Tool 1 x
COPS RP 1181 Pipeline Operational Status 1
x
COPS RP 1182 Assessment and Management of Dents in Pipelines 1 x
COPS RP 1183 Onshore Gathering Lines 1 x
Committee Publication Type Publication Number Title Edition Pre-Ballot Phase Ballot Phase In Editing
 CSOEM  Spec 2C  Offshore Pedestal-Mounted Cranes
 8 x    
 CSOEM RP 2A-LRFD  Planning, Designing, and Constructing Fixed Offshore Platforms – Load Resistance Factor Design
 2   x  
 CSOEM RP 2EQ-A1  Seismic Design Procedures and Criteria for Offshore Structures
 1    x  
 CSOEM RP 2MET  Deprivation of Metocean Design and Operating Conditions
 2    x  
 CSOEM RP 2SK  Design and Analysis of Stationkeeping Systems for Floating Structures
 4 x    
 CSOEM RP 2TOP Topsides Structure
 1      x
CSOEM TR 13TR2 Procedure for testing and evaluating the performance of friction (drag) reducers in aqueous-based fluid flowing in straight, smooth circular conduits 1 x
CSOEM RP 17Q Recommended Practice on Subsea Equipment Qualification 2 x
CSOEM Std 19C Measurement of and Specifications for Proppants Used in Hydraulic Fracturing and Gravel-packing Operations 2 x
CSOEM RP 19G10 Design and Operation of Intermittent Gas-Lift Wells Systems 1 x
CSOEM RP 19G11 Dynamic Simulation of Gas-Lift Wells and Systems 1 x
CSOEM RP 19G5 Operation, Maintenance, Surveillance and Troubleshooting of Gas-Lift Installations 1 x
CSOEM TR 6MET Metallic Material Limits for Wellhead Equipment Used in High Temperature for API 6A and API 17D Applications 2 x
CSOEM Bull E3 Well Abandonment and Decommissioning 2 x
CSOEM Spec 15PX Crosslinked Polyethylene (PEX) Linepipe 1
x
CSOEM Std 53 Blowout Prevention Equipment Systems for Drilling Wells 5
x
CSOEM RP 59 Recommended Practice for Well Control Operations 3 x
CSOEM RP 67 Oilfield Explosives Safety 3
x
CSOEM Std 1104 Welding of Pipelines and Related Facilities 22 x
CSOEM Spec 10A Specification for Cements and Materials for Well Cementing 25
x
CSOEM Spec 10D Bow-Spring Casing Centralizers 7 x
CSOEM Spec 10F Cementing Float Equipment 4
x
CSOEM RP 11AR Recommended Practice for Care and Use of Subsurface Pumps 5 x
CSOEM Spec 11B Sucker Rods 28
x
CSOEM Spec 11D1 Packers and Bridge Plugs 4 x
CSOEM Spec 11E Specification for Pumping Units (includes Errata dated August 2015) 20 x
CSOEM Spec 11P Specification for Packaged Reciprocating Compressors for Oil and Gas Production Services 3 x
CSOEM Spec 11PL Plunger Lift 1 x
CSOEM Spec 13A Drilling Fluid Materials 19 x
CSOEM RP 13B-1 Field Testing Water-Based Drilling Fluids 5
x
CSOEM RP 13B-2 Field Testing Oil-Based Drilling Fluids 6 x
CSOEM TR  13-3 Size Measurement of Dry, Granular Drilling Fluid Particulates 1     x
CSOEM RP 13C Drilling Fluid Processing systems Evaluation 6 x
CSOEM RP 13I Laboratory Testing of Drilling Fluids 9
x
CSOEM RP 13K Chemical Analysis of Barite 4 x
 CSOEM TR  13M5  Procedure for Testing and Evaluating the Performance of Friction (Drag) Reducers in Aqueous-based Fluid Flowing in Straight, Smooth Circular Conduits    
 1     x
 CSOEM TR  13M6  Measuring Leakoff of Completion Fluids Under Dynamic Conditions   
 1      x
CSOEM Spec 114A Subsurface Safety Valve Equipment 13 x
CSOEM Spec 14L Specification for Lock Mandrels and Landing Nipples 3 x
CSOEM Std 15LE Polyethylene (PE) Line Pipe 5 x
 CSOEM  RP  15LFH  Lay Flat Hose  1  x    
 CSOEM  Spec  15LFH  Lay Flat Hose  1  x    
 CSOEM Spec  15S  Spoolable Reinforced Plastic Line Pipe    
  x  
CSOEM  Spec  16A  Drill Through Equipment 4    x  
CSOEM  Std  16AR  Repair and Remanufacture of Drill-Through Equipment    
 1  x    
CSOEM Spec 16B Blowout Prevention Equipment for Wireline, Coil Tubing and Polished Rod Application 1 x
CSOEM Spec 16C Choke and Kill Equipment 3
x
 CSOEM Spec  16F  Marine Drilling Riser Equipment  1 x    
CSOEM Spec 16RCD Specification for Rotating Control Devices 3 x
CSOEM RP 16ST Coiled Tubing Well Control Equipment Systems 2 x
CSOEM Spec 17D Specification for Subsea Wellhead and Tree Equipment 3 x
CSOEM Std 17G1 System Configuration and Operation of Subsea Well Intervention Systems 1 x
CSOEM RP 17G2 Recommended Practice for Subsea Pumping Well Intervention Systems 1 x
CSOEM RP 17G3 Recommended Practice for Subsea Well Intervention Systems Using Non-Ferrous Alloys 1 x
CSOEM RP 17G4 Recommended Practice for Subsea Riserless Light Well Intervention Systems 1 x
CSOEM RP 17G5 Recommended Practice for Intervention Workover Control Systems (IWOCS) 1 x
CSOEM RP 17H Recommended Practice for Remotely Operated Tools and Interfaces on Subsea Production Systems 3 x
CSOEM RP 17X Subsea Pump Module Systems 1 x
CSOEM RP 17Y Subsea Chemical Injection 1 x
CSOEM RP 19B Evaluation of Well Perforators 3 x
CSOEM Spec 19CI Downhole Chemical Injection Devices and Related Equipment 1 x
CSOEM Spec 19G1 Side-pocket Mandrels 2 x
CSOEM TR 19G12 Gas Lift Surveillance, Automation and Control Systems 1 x
CSOEM RP 19G13 Challenging Gas-lift Applications 1 x
CSOEM Spec 19G2 Flow-control Devices for Side-pocket Mandrels 2 x
CSOEM Spec 19ICD Inflow Control Devices 1 x
CSOEM Spec 19ICV Interval Control Valves 1 x
CSOEM Spec 19LH Liner Hanger Equipment 1 x
CSOEM Spec 19V Subsurface Barrier Valves and Related Equipment 2 x
 CSOEM Spec 20A-A1 Carbon Steel, Alloy Steel, Stainless Steel, and Nickel Base Alloy Castings for Use in the Petroleum and Natural Gas Industry 2 x    
CSOEM Spec 20B Open Die Shaped Forgings for use in the Petroleum and Natural Gas Industry 2 x
 CSOEM Spec  20E-A1 Alloy and Carbon Steel Bolting for Use in the Petroleum and Natural Gas Industries 2 x    
CSOEM Std 20G Qualification of Welding Suppliers for Equipment Used in the Petroleum and Natural Gas Industry 1 x
CSOEM Std 20N Heat Treatment Services - Continuous Furnace for Equipment Used in the Petroleum and Natural Gas Industry 1 x
CSOEM Std 20P Qualification of Suppliers for Plating and Coating used in the Petroleum and Natural Gas Industries 1 x
CSOEM Std 20R Qualification of Suppliers of Subsurface Electronics for Use in the Petroleum and Natural Gas Industries 1 x
CSOEM TR 21TR1 Material Selection for Bolting 1
x
CSOEM Spec 2B Structural Steel Pipe 7 x
CSOEM RP 2FSIM Floating Systems Integrity Management 1
x
CSOEM RP 2MIM Mooring Integrity Management 1
x
CSOEM RP 2RIM Integrity Management of Risers from Floating Production Systems 1
x
CSOEM Spec 2W Steel Plates for Offshore Structures, Produced by Thermo-Mechanical Control Processing (TMCP) 6 x
 CSOEM Spec 4F Drilling and Well Servicing Structures 4   x  
 CSOEM RP 4G Operation, Inspection, Maintenance, and Repair of Drilling and Well Servicing Structures   
 4   x  
 CSOEM RP 5A3 Thread Compounds for Casing, Tubing, Line Pipe and Drill Stem Elements 4 x    
CSOEM Spec 5B Threading, Gauging, and Thread Inspection of Casing, Tubing, and Line Pipe Threads 17 x
 CSOEM RP 5B1 Gauging and Inspection of Casing, Tubing and Line Pipe Threads 6 x    
CSOEM Spec 5B-A1 Threading, Gauging, and Thread Inspection of Casing, Tubing, and Line Pipe Threads 16 x
 CSOEM Spec 5DP  Drill Pipe 2 x    
 CSOEM RP 5L8 Field Inspection Practice of New Line Pipe 3 x    
CSOEM RP 65-3 Well Abondonment Practices 1 x
CSOEM TR 6AF3 HPHT Flanges for Wellhead and Christmas Tree Equipment Surface Equipment 1 x
CSOEM RP 6AR Repair and Remanufacture of Wellhead and Christmas Tree Equipment 2 x
CSOEM Spec 6AV1 Validation of Safety and Shutdown Valves for Sandy Service 3 x
CSOEM Spec 6FB Specification for Fire Test for End Connections 4 x
CSOEM Spec 6FD Specification for Fire Test for Check Valves 2 x
CSOEM RP 6RT Recommended Practice for Running Tools 1 x
CSOEM Std 6X Design Calculations for Pressure-containing Equipment 2 x
 CSOEM Spec 7-1 Rotary Drill Stem Elements 2 x    
CSOEM Spec 7-1-A4 Specification for Rotary Drill Stem Elements 1 x
CSOEM Spec 7-2-A1 Threading and Gauging of Rotary Shouldered Connections 2 x
 CSOEM RP 7G-2 Inspection and Classification of Used Drill Stem Elements 2   x  
CSOEM Spec 7HU2 Hammer Unions 1 x
 CSOEM Spec 7K Equipment Procedures for Inspection, Maintenance, Repair, and Remanufacture of Drilling Equipment 6   x  
CSOEM RP 7L Inspection, Maintenance, Repair, and Remanufacture of Drilling Equipment 2
x
CSOEM Spec 8C Drilling and Production Hoisting Equipment (PSL 1 and PSL 2) 6 x
CSOEM Spec Q1 Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry 10 x
CSOEM Spec Q2 Specification for Quality Management System Requirements for Service Supply Organizations for the Petroleum and Natural Gas Industries 2 x
 CSOEM Std 64 Diverter Equipment Systems 3      
x RP 2D-2 Offshore Crane Operator Training 1 x    
DPOSC RP 14F Risk-based Approach for Managing Hydrocarbon Vapor Exposure during Tank Gauging, Sampling, and Maintenance of Onshore Production Facilities 6 x
DPOSC RP 75 Development of a Safety and Environmental Management Program for Offshore Operations and Facilities 4
x
DPOSC Bull 4565 Habitat Conservation Practices 1 x
DPOSC Std 4590 Pneumatic Controllers 1 x
 DPOSC RP 54  Occupational Safety for Oil and Gas Well Drilling and Servicing Operations
 4   x  
 DPOSC RP 78  Wellbore Positioning 1 x    
DPOSC RP 90-1 Annular Casing Pressure Management for Offshore WellsAnnular Casing Pressure Management for Offshore Wells 2 x
DPOSC RP 92C Controlled Mud Level Managed Pressure Drilling Operations 1 x
DPOSC RP 92P Pressurized Mud Cap Operations for Rigs with Subsea BOP Systems 1 x
DPOSC RP 92S Managed Pressure Drilling Operations – Surface Back-pressure with a Subsea Blowout Preventer 1
x
DPOSC RP T-8 Safety Training for Workers on Offshore Production Facilities 1 x