Standards Plan
Below is a list of projected updated standards by industry segment for the current year.
See a breakdown of standards in pre-ballot, ballot, and editing: Chart Standards
For the best experience, please view on full-size desktop
| Committee | Pub. Type | Pub. No | Title | Ed. | Pre-Ballot Phase | Ballot Phase | In Editing |
|---|---|---|---|---|---|---|---|
| CRE | Std | 653-A2 | Addendum 2 to Tank Inspection, Repair, Alteration, and Reconstruction | 3 | X | ||
| CRE | RP | 552 | Transmission Systems | 2 | X | ||
| CRE | RP | 520 Pt 2 | Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries, Part II, "Installation" | 5 | X | ||
| GCM | RP | 1604 | Closure of Underground Petroleum Storage Tanks | 4 | X | ||
| CRE | Std | 625 | Tank Systems for Refrigerated Liquefied Gas Storage (includes Addendum 1, published July 2013) | 1 | X | ||
| CRE | Std | 663 | Hairpin-type Heat Exchangers | 1 | X | ||
| CRE | TR | 684 | Tutorial on the API Standard Paragraphs Covering Rotor Dynamics and Balance (An Introduction to Lateral Critical and Train Torsional Analysis and Rotor Balancing) | 3 | X | ||
| CRE | RP | 540 | Electrical Installations in Petroleum Processing Plants | 5 | X | ||
| CRE | RP | 687 | Rotor Repair | 2 | X | ||
| CRE | Std | 681 | Liquid Ring Vacuum Pumps and Compressors | 2 | X | ||
| CRE | Std | 618 | Reciprocating Compressors for Petroleum, Chemical and Gas Industry Services | 6 | X | ||
| CRE | Std | 685-A1 | Sealless Centrifugal Pumps for Petroleum, Petrochemical, and Gas Industry Services | 2 | X | ||
| CRE | Std | 650 | Welded Tanks for Oil Storage | 12 | X | ||
| CRE | RP | 585 | Pressure Equipment Integrity Incident Investigation | 1 | X | ||
| CRE | Std | 599 | Metal Plug Valves--Flanged and Welding Ends - Russian | 5 | X | ||
| CRE | Std | 565 | Thermal Reactors in Sulfur Recovery Units for General Refinery Service | 1 | X | ||
| CRE | RP | 934-F | Minimum Pressurization Temperatures, MPT, for Heavy Wall Pressure Vessels | 1 | X | ||
| CRE | TR | 934-H | Maintenance and Inspection of 2-1/4Cr-1Mo and 2-1/4Cr-1Mo-V Steel Pressure Vessels in High Pressure, High Temperature Hydrogen-Containing Service | 1 | X | ||
| CRE | TR | 941-A-A1 | Addendum 1 to The Technical Basis Document for API RP 941 | 1 | X | ||
| CRE | RP | 945 | Avoiding Environmental Cracking in Amine Units | 4 | X | ||
| CRE | Std | 561 | Reforming Furnaces for Hydrogen and Syngas Production | 1 | X | ||
| CRE | Std | 534 | Heat Recovery Steam Generators | 3 | X | ||
| CRE | Std | 667 | Plate and Frame Heat Exchangers for General Refinery Services (Formerly Std. 662, Part 1) | 1 | X | ||
| CRE | Std | 669 | Heat Recovery Systems | 1 | X | ||
| CRE | Std | 676 | Positive Displacement Pumps - Rotary | 4 | X | ||
| CRE | Std | 2510 | Design and Construction of LPG Installations | 9 | X | ||
| CRE | RP | 697 | Pump Repair | 1 | X | ||
| CRE | Std | 810 | Welded Plate-Block Heat Exchangers | 1 | X | ||
| CRE | TR | 934-J | Coke Drum Repair | 1 | X | ||
| CRE | RP | 581 | Risk-Based Inspection Methodology | 3 | X | ||
| CRE | Std | 975 | Refractory Installation Quality Control – Inspection and Testing of Refractory Brick Linings and Materials | 1 | X | ||
| CRE | Std | 677 | General Purpose Gears, Slow Speed (Extruder) gears, and Epicyclic gear units for Petroleum, Chemical, and Gas Industry Services | 4 | X | ||
| CRE | Std | 12R1 | Recommended Practice for Setting, Maintenance, Inspection, Operation, and Repair of Tanks in Production Service | 6 | X | ||
| CRE | RP | 571 | Damage Mechanisms Affecting Fixed Equipment in the Refining Industry | 3 | X | ||
| CRE | Std | 685 | Sealless Centrifugal Pumps for Petroleum, Petrochemical, and Gas Industry Services | 3 | X | ||
| CRE | Std | 617 | Axial and Centrifugal Compressors and Expander-compressors for Petroleum, Chemical and Gas Industry Services | 9 | X | ||
| CRE | RP | 554-Part 3 | Process Control Systems-Project Execution and Process Control System Ownership | 2 | X | ||
| CRE | RP | 554-Part 2 | Process Control Systems-Process Control System Design | 2 | X | ||
| CRE | RP | 554 Part 1 | Process Control Systems, Part 1: Process Control Systems Functions and Functional Specification Development | 3 | X | ||
| CRE | Std | 538 | Industrial Fired Boilers for General Refinery Service | 2 | X | ||
| CRE | Std | 535 | Burners for Fired Heaters in General Refinery Services | 4 | X | ||
| CRE | Std | 560-A1 | Addendum 1 to Fired Heaters for General Refinery Services | 5 | X | ||
| CRE | Std | 546 | Brushless Synchronous Machines 500 kVA and Larger | 4 | X | ||
| CRE | Std | 610 | Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries | 12 | X | ||
| CRE | RP | 686 | Machinery Installation and Installation Design | 3 | X | ||
| CRE | Std | 608 | Metal Ball Valves--Flanged, Threaded and Butt-Welding Ends | 6 | X | ||
| CRE | Std | 611 | General Purpose Steam Turbines for Petroleum, Chemical, and Gas Industry Services | 6 | X | ||
| CRE | Std | 682 | Pumps—Shaft Sealing Systems for Centrifugal and Rotary Pumps | 5 | X | ||
| CRE | TR | 981 | Comparison of ASTM C832 and DIN EN 993-9 | 1 | X | ||
| CRE | Std | 612 | Petroleum, petrochemical and natural gas industries—Steam turbines—Special-purpose applications | 8 | X | ||
| CRE | Std | 616 | Gas Turbines for the Petroleum, Chemical and Gas Industry Services | 6 | X | ||
| CRE | Std | 623 | Steel Globe Valves—Flanged and Butt-welding Ends, Bolted Bonnets | 2 | X | ||
| CRE | Std | 613 | Special Purpose Gear Units for Petroleum, Chemical and Gas Industry Services | 6 | X | ||
| CRE | RP | 553 | Refinery Valves and Accessories for Control and Safety Instrumented Systems | 3 | X | ||
| CRE | RP | 578 | Guidelines for a Material Verification Program (MVP) for New and Existing Assets | 3 | X | ||
| CRE | Std | 624 | Type Testing of Rising Stem Valves Equipped with Flexible Graphite Packing for Fugitive Emissions | 2 | X | ||
| CRE | RP | 582 | Welding Guidelines for the Chemical, Oil, and Gas Industries | 4 | X | ||
| CRE | RP | 941 | Steels for Hydrogen Service at Elevated Temperatures and Pressures in Petroleum Refineries and Petrochemical Plants | 9 | X | ||
| CRE | Std | 660 | Shell-and-Tube Heat Exchangers | 1 0 | X | ||
| CRE | Std | 661 | Petroleum, Petrochemical, and Natural Gas Industries—Air-Cooled Heat Exchangers for General Refinery Service | 8 | X | ||
| CRE | Std | 664 | Spiral Plate Heat Exchangers | 2 | X | ||
| CRE | RP | 651 | Cathodic Protection of Aboveground Storage Tanks | 5 | X | ||
| CRE | RP | 652 | Linings of Aboveground Petroleum Storage Tank Bottoms | 5 | X | ||
| CRE | Std | 530 | Calculation of Heater-tube Thickness in Petroleum Refineries | 8 | X | ||
| CRE | Std | 614 | Lubrication, Shaft-Sealing, and Control-Oil Systems and Auxiliaries for Petroleum, Chemical and Gas Industry Services | 6 | X | ||
| CRE | Std | 671 | Special Purpose Couplings for Petroleum, Chemical and Gas Industry Services | 5 | X | ||
| CRE | Std | 673 | Centrifugal Fans for Petroleum, Chemical and Gas Industry Services | 4 | X | ||
| CRE | RP | 688 | Pulsation and Vibration Control in Positive Displacement Machinery Systems for Petroleum, Petrochemical, and Natural Gas Industry Services | 2 | X | ||
| CRE | API | 555 | Process Analyzers | 4 | X | ||
| CRE | RP | 556 | Instrumentation, Control, and Protective Systems for Gas Fired Heaters | 3 | X | ||
| CRE | API | 510-A2 | Addendum 2, Pressure Vessel Inspection Code: Maintenance Inspection, Rating, Repair, and Alteration | 10 | X | ||
| CRE | RP | 500 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2 | 4 | X | ||
| CRE | RP | 572 | Inspection Practices for Pressure Vessels | 5 | X | ||
| CRE | RP | 573 | Inspection of Fired Boilers and Heaters | 4 | X | ||
| CRE | RP | 575 | Inspection of Atmospheric & Low Pressure Storage Tanks | 4 | X | ||
| CRE | RP | 577 | Welding Processes, Inspection, and Metallurgy | 3 | X | ||
| CRE | RP | 583 | Corrosion Under Insulation and Fireproofing | 2 | X | ||
| CRE | RP | 584 | Integrity Operating Windows | 2 | X | ||
| CRE | Std | 520 Pt 1 | Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries--Part 1, Sizing and Selection | 10 | X | ||
| CRE | Std | 521 | Guide for Pressure-relieving and Depressuring Systems | 7 | X | ||
| CRE | Std | 527 | Seat Tightness of Pressure Relief Valves | 5 | X | ||
| CRE | Std | 2000 | Venting Atmospheric and Low-pressure Storage Tanks | 8 | X | ||
| COSFP | RP | 2201 | Safe Hot Tapping Practices in the Petroleum and Petrochemical Industries | 6 | X | ||
| CRE | RP | 2350 | Overfill Protection for Storage Tanks in Petroleum Facilities | 5 | X | ||
| COSFP | RP | 2009 | Safe Welding, Cutting and Hot Work Practices in the Petroleum and Petrochemical Industries | 8 | X | ||
| GCM | RP | 1637 | Using the API Color-symbol System to Mark Equipment and Vehicles for Product Identification at Service Stations and Distribution Terminals | 4 | X | ||
| CRE | Std | 537-A1 | Flare Details for Petroleum, Petrochemical, and Natural Gas Industries | 3 | X | ||
| CRE | RP | 615 | Valve Selection Guide | 3 | X | ||
| CRE | Std | 599 | Metal Plug Valves — Flanged, Threaded and Welding Ends | 8 | X | ||
| GCM | RP | 1595 | Design, Construction, Operation, Maintenance, and Inspection of Aviation Pre-Airfield Storage Terminals | 3 | X | ||
| CRE | Std | 600 | Steel Gate Valves - Flanged and Butt-welding Ends, Bolted Bonnets | 14 | X | ||
| CRE | Std | 598 | Valve Inspection and Testing | 11 | X | ||
| CRE | Std | 607 | Fire Test for Quarter-turn Valves and Valves Equipped with Non-Metallic Seats | 8 | X | ||
| CRE | Std | 609 | Butterfly Valves: Double-flanged, Lug- and Wafer-type | 9 | X | ||
| CRE | Std | 602 | Gate, Globe, and Check Valves for Sizes DN 100 (NPS 4) and Smaller for the Petroleum and Natural Gas Industries | 11 | X | ||
| RPSG | RP | 751 | Safe Operation of Hydrofluoric Acid Alkylation Units | 5 | X | ||
| CRE | Std | 650 | Welded Tanks for Oil Storage | 11 | X | ||
| CRE | Std | 650 | Welded Tanks for Oil Storage | 13 | X | ||
| CRE | TR | 655 | Volatile Corrosion Inhibitors for Storage Tanks | 1 | X |
For the best experience, please view on full-size desktop
| Committee | Pub. Type | Pub. No | Title | Ed. | Pre-Ballot Phase | Ballot Phase | In Editing |
|---|---|---|---|---|---|---|---|
| COPM | Ch. | 6.1A | Liquid Flow Measurement Systems for Single Phase Liquids – General Considerations | 1 | X | ||
| CSOEM | Spec | 6A-A2 | Addendum 2 to Sp12/5/2008ecification for Wellhead and Christmas Tree Equipment | 19 | X | ||
| COPM | Ch. | 14.3.4 | Concentric, Square-Edged Orifice Meters, Part 4—Background, Development, Implementation Procedures and Subroutine Documentation (AGA Report No. 3, Part 4) | 4 | X | ||
| COPM | Ch. | 12.2 | Calculation of Liquid Petroleum Quantities Measured by Turbine or Displacement Meters (incorporates Chapters 12.2.1, 12.2.2, 12.2.3, 12.2.4 and 12.2.5) | 2 | X | ||
| COPM | Ch. | 19.3, Part H | Tank Seals and Fittings Certification—Administration (also supersedes and incorporates the relevant sections of API MPMS Chapter 19.3 Parts F and G) | 2 | X | ||
| COPM | Ch. | 22.5 | Testing Protocols—Electronic Flow Computer Calculations | 1 | X | ||
| COPM | Ch. | 20.1 | Production Measurement and Allocation Systems | 2 | X | ||
| COPM | Ch. | 14.10 | Measurement of Flow to Flares | 2 | X | ||
| COPM | Ch. | 6.2A | Truck and Rail Loading/Unloading Measurement Systems | 1 | X | ||
| COPM | Ch. | 6.3A | Pipeline and Marine Loading and Unloading Measurement Systems | 1 | X | ||
| GCOP | Std | 1164 | Pipeline Cybersecurity | 3 | X | ||
| COPM | Ch. | 2.2A | Measurement and Calibration of Upright Cylindrical Tanks by the Manual Strapping Method | 2 | X | ||
| COPM | Ch. | 5.6 | Measurement of Liquid Hydrocarbons by Coriolis Meters(ANSI/API MPMS 5.6-2002) | 2 | X | ||
| COPM | Std | 2554 | Measurement and Calibration of Tank Cars | 2 | X | ||
| COPM | Ch. | 4.9.1 | Methods of Calibration for Displacement and Volumetric Tank Provers, Part 1—Introduction to the Determination of the Volume of Displacement and Tank Provers | 2 | X | ||
| GCOP | RP | 1162 | Public Awareness Programs for Pipeline Operators | 3 | X | ||
| COPM | Ch. | 4.2 | Displacement Provers | 4 | X | ||
| COPM | Ch. | 12.4.1 | Calculation of Petroleum – Base Prover Quantity Calibration – Waterdraw Method | 1 | X | ||
| COPM | Ch. | 12.4.2 | Calculation of Petroleum – Base Prover Quantity Calibration – Master Meter Method | 1 | X | ||
| COPM | Ch. | 12.4.3 | Calculation of Petroleum – Prover Quantity Calibration – Gravimetric Method | 1 | X | ||
| COPM | Ch. | 17.2 | Measurement of Cargoes on Board Tank Vessels | 3 | X | ||
| COPM | Ch. | 23.2 | Reconciliation of Liquid Pipeline Quantities | 1 | X | ||
| COPM | Ch. | 20.3 | Measurement of Multiphase Flow (supersedes RP 86) | 2 | X | ||
| COPM | Ch. | 21.2 | Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters | 2 | X | ||
| COPM | Ch. | 22.1 | Testing Protocols—General Guidelines for Developing Testing Protocols for Devices Used in the Measurement of Hydrocarbon Fluids- Addendum 1 | 2 | X | ||
| COPM | TR | 2579 | Liquid Hydrocarbon Measurement Uncertainty Calculations | 1 | X | ||
| COPM | Ch. | 17.14.1 | Measurement of Bulk Cargoes by Draft Survey Part 1: Ocean Going Vessels | 1 | X | ||
| COPM | Ch. | 17.14.2 | Measurement of Bulk Cargoes by Draft Survey Part 2: Inland Barges | 1 | X | ||
| COPM | Ch. | 19.2 | Evaporative Loss from Floating-Roof Tanks(previously Publications 2517 and 2519) | 4 | X | ||
| COPM | Ch. | 10.10 | Continuous on-line Measurement of Water In Petroleum (Crude Oil and Condensate) | 1 | X | ||
| GCOP | RP | 1183 | Measuring and Assessing Dents in Pipelines | 1 | X | ||
| COPM | Ch. | 4.6 | Pulse Interpolation | 3 | X | ||
| COPM | Ch. | 4.8 | Operation of Proving Systems | 3 | X | ||
| COPM | TR | 2571 | Fuel Gas Measurement | 2 | X | ||
| GCOP | RP | 1165 | Pipeline SCADA Displays | 2 | X | ||
| GCOP | Std | 1163 | In-line Inspection Systems Qualification | 3 | X | ||
| COPM | Ch. | 5.8 | Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters | 3 | X | ||
| COPM | Ch. | 21.1 | Electronic Gas Measurement | 3 | X | ||
| GCOP | RP | 1182 | Safety Provisions for Onshore Gas Gathering Lines | 1 | X | ||
| GCOP | RP | 1169 | Pipeline Construction Inspection | 2 | X | ||
| GCOP | RP | 1161 | Pipeline Operator Qualification | 5 | X | ||
| GCOP | RP | 1170 | Design and Operation of Solution-mined Salt Caverns Used for Natural Gas Storage | 2 | X | ||
| GCOP | RP | 1171 | Functional Integrity of Natural Gas Storage in Depleted Hydrocarbon Reservoirs and Aquifer Reservoirs | 2 | X | ||
| GCOP | RP | 2611 | Terminal Piping Inspection - Inspection of In-Service Terminal Piping Systems | 2 | X | ||
| COPM | Ch. | 14.1 | Collecting and Handling of Natural Gas Samples for Custody Transfer | 8 | X | ||
| GCOP | RP | 80 | Definition of Onshore Gas Gathering Lines | 2 | X | ||
| COPM | Ch. | 20.4 | Phase Behavior Applications in Upstream Measurement | 1 | X | ||
| COPM | Ch. | 8.1 | Manual Sampling of Petroleum and Petroleum Products (ASTM D4057) | 5 | X | ||
| COPM | Ch. | 8.4 | Standard Practice for Sampling and Handling of Fuels for Volatility Measurement (ASTM D5842) | 5 | X | ||
| COPM | Ch. | 9.1 | Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method(ASTM D1298) | 4 | X | ||
| COPM | Ch. | 9.2 | Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer(ASTM D1657) | 4 | X | ||
| COPM | Ch. | 9.3 | Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method(ASTM D6822) | 4 | X | ||
| COPM | Ch. | 10.4 | Determination of Sediment and Water in Crude Oil by the Centrifuge Method (Field Procedure) | 5 | X | ||
| COPM | Ch. | 8.6 | Standard Practice for Continuous and Intermittent Sampling and Handling of “Liquefied Natural Gas” National adoption of ISO 8943 | 1 | X | ||
| COPM | Ch. | 8.2 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products(ASTM D4177) | 5 | X | ||
| GCOP | RP | 1175 | Pipeline Leak Detection - Program Management | 2 | X | ||
| COPM | Ch. | 3.1B | Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Automatic Tank Gauging | 4 | X | ||
| COPM | Ch. | 2.3 | Calibration of Spheres and Spheroids | 1 | X | ||
| COPM | Ch. | 14.11 | Venturi Metering of Natural Gas and Other Related Hydrocarbon Fluids | 1 | X |
For the best experience, please view on full-size desktop
| Committee | Pub. Type | Pub. No | Title | Ed. | Pre-Ballot Phase | Ballot Phase | In Editing |
|---|---|---|---|---|---|---|---|
| CSOEM | RP | 13M-6 | Measuring Leakoff of Completion Fluids Under Dynamic Conditions | 1 | X | ||
| CSOEM | Spec | 12J | Specification for Oil and Gas Separators | 8 | X | ||
| CSOEM | RP | 5L8 | Field Inspection of New Line Pipe | 3 | X | ||
| CSOEM | Spec | 7HU2 | Hammer Unions | 1 | X | ||
| CSOEM | RP | 17G | Design and Manufacture of Subsea Well Intervention Equipment | 3 | X | ||
| CSOEM | Std | 20G | Qualification of Welding Suppliers for Equipment Used in the Petroleum and Natural Gas Industry | 1 | X | ||
| CSOEM | Spec | 4F | Drilling and Well Servicing Structures | 4 | X | ||
| CSOEM | RP | 16ST | Coiled Tubing Well Control Equipment Systems | 2 | X | ||
| CSOEM | RP | 2SK | Design and Analysis of Stationkeeping Systems for Floating Structures | 4 | X | ||
| CSOEM | Spec | 19G2 | Flow-control Devices for Side-pocket Mandrels | 2 | X | ||
| DPOSC | RP | 75 | Safety and Environmental Management System for Offshore Operations and Assets | 4 | X | ||
| CSOEM | Std | 17G1 | System Configuration and Operation of Subsea Well Intervention Systems | 1 | X | ||
| CSOEM | RP | 17G2 | Recommended Practice for Subsea Pumping Well Intervention Systems | 1 | X | ||
| CSOEM | RP | 17G3 | Recommended Practice for Subsea Well Intervention Systems Using Non-Ferrous Alloys | 1 | X | ||
| CSOEM | RP | 17G4 | Recommended Practice for Subsea Riserless Light Well Intervention Systems | 1 | X | ||
| CSOEM | RP | 17X | Subsea Pump Module Systems | 1 | X | ||
| DPOSC | RP | 90-1 | Annular Casing Pressure Management for Offshore Wells | 2 | X | ||
| CSOEM | Spec | 11B | Sucker Rods and Rod Related Products | 28 | X | ||
| CSOEM | Spec | 7K | Drilling and Well Servicing Equipment | 6 | X | ||
| CSOEM | Std | 6DSSX | Standard for Actuator Sizing and Mounting Kits for Subsea Pipeline Valves | 1 | X | ||
| CSOEM | Spec | 16C | Choke and Kill Equipment | 3 | X | ||
| CSOEM | Spec | 16B | Blowout Prevention Equipment for Wireline, Coil Tubing and Polished Rod Application | 1 | X | ||
| CSOEM | RP | 17Q | Recommended Practice on Subsea Equipment Qualification | 2 | X | ||
| CSOEM | RP | 17Y | Recommended Practice for Design, Testing and Qualification of Subsea Chemical Injection | 1 | X | ||
| CSOEM | Spec | Q2 | Specification for Quality Management System Requirements for Service Supply Organizations for the Petroleum and Natural Gas Industries | 2 | X | ||
| CSOEM | RP | 5A3 | Thread Compounds for Casing, Tubing, Line Pipe, and Drill Stem Elements | 4 | X | ||
| CSOEM | RP | 5B1 | Gauging and Inspection of Casing, Tubing, and Line Pipe Threads | 6 | X | ||
| CSOEM | Spec | 5DP | Drill Pipe | 2 | X | ||
| CSOEM | Spec | 7-1 | Rotary Drill Stem Elements | 2 | X | ||
| CSOEM | RP | 7G-2 | Drill Stem Element Inspection | 2 | X | ||
| CSOEM | RP | E3 | Well Abandonment and Decommissioning | 2 | X | ||
| CSOEM | Spec | 17D | Specification for Subsea Wellhead and Tree Equipment | 3 | X | ||
| CSOEM | Spec | 16RCD | Specification for Rotating Control Devices | 3 | X | ||
| CSOEM | Spec | 6FD | Specification for Fire Test for Check Valves | 2 | X | ||
| CSOEM | RP | 6RT | Guidelines for Design and Manufacture of Surface Wellhead Running, Retrieving and Testing Tools, Clean-out Tools and Wear Bushings | 1 | X | ||
| CSOEM | Spec | 10D | Bow-Spring Casing Centralizers | 7 | X | ||
| CSOEM | RP | 19D | Recommended Practice for Measuring the Long-term Conductivity of Proppants | 2 | X | ||
| CSOEM | Std | 20R | Qualification of Suppliers of Subsurface Electronics for Use in the Petroleum and Natural Gas Industries | 1 | X | ||
| CSOEM | Spec | Q1 | Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry | 10 | X | ||
| CSOEM | TR | 6AF3 | HPHT Flanges for Wellhead and Christmas Tree Equipment Surface Equipment | 1 | X | ||
| CSOEM | Std | 15LE | Polyethylene (PE) Line Pipe | 5 | X | ||
| DPOSC | RP | 2D-2 | Offshore Crane Personnel Training | 1 | X | ||
| DPOSC | Bull | 4565 | Habitat Conservation Practices | 1 | X | ||
| CSOEM | Std | 20P | Qualification of Suppliers for Plating and Coating used in the Petroleum and Natural Gas Industries | 1 | X | ||
| CSOEM | Spec | 8C | Drilling and Production Hoisting Equipment (PSL 1 and PSL 2) | 6 | X | ||
| CSOEM | RP | 13I | Recommended Practice for Laboratory Testing of Drilling Fluids | 9 | X | ||
| CSOEM | Spec | 2C | Offshore Pedestal-mounted Cranes | 8 | X | ||
| CSOEM | RP | 2GEN | General Requirements for Offshore Structures | 1 | X | ||
| DPOSC | RP | 92C | Controlled Mud Level Managed Pressure Drilling Operations | 1 | X | ||
| CSOEM | Std | 6DHP | Pipeline Valves for High Pressure Service | 1 | X | ||
| CSOEM | RP | 19B | Evaluation of Well Perforators | 3 | X | ||
| CSOEM | Spec | 16A-A2 | Specification for Drill-through Equipment | 4 | X | ||
| CSOEM | RP | 65-3 | Well Abandonment Practices | 1 | X | ||
| CSOEM | TR | 19G12 | Gas Lift Surveillance, Automation and Control Systems | 1 | X | ||
| CSOEM | RP | 17G5 | Subsea Intervention Workover Control Systems | 1 | X | ||
| CSOEM | Std | 1104 | Welding of Pipelines and Related Facilities | 22 | X | ||
| CSOEM | Spec | 16A-A3 | Specification for Drill-through Equipment | 4 | X | ||
| CSOEM | Std | 6DX | Standard for Actuator Sizing and Mounting Kits for Pipeline Valves | 2 | X | ||
| CSOEM | Spec | 6D | Specification for Pipeline Valves | 25 | X | ||
| CSOEM | Spec | 11D1 | Packers and Bridge Plugs | 4 | X | ||
| CSOEM | Spec | 14A-A2 | Subsurface Safety Valve Equipment | 12 | X | ||
| CSOEM | RP | 13B-2 | Field Testing Oil-based Drilling Fluids | 6 | X | ||
| CSOEM | RP | 13C | Drilling Fluid Processing Systems Evaluation | 6 | X | ||
| CSOEM | RP | 13K | Chemical Analysis of Barite | 4 | X | ||
| CSOEM | Spec | 14L | Specification for Lock Mandrels and Landing Nipples | 3 | X | ||
| CSOEM | Spec | 19ICV | Interval Control Valves | 1 | X | ||
| CSOEM | Spec | 19ICD | Inflow Control Devices | 1 | X | ||
| CSOEM | Spec | 2B | Structural Steel Pipe | 7 | X | ||
| CSOEM | Spec | 5B-A1 | Threading, Gauging, and Thread Inspection of Casing, Tubing, and Line Pipe Threads | 16 | X | ||
| CSOEM | Spec | 5B | Threading, Gauging, and Thread Inspection of Casing, Tubing, and Line Pipe Threads | 17 | X | ||
| CSOEM | Spec | 7-2-A1 | Threading and Gauging of Rotary Shouldered Connections | 2 | X | ||
| CSOEM | Spec | 20B | Open Die Shaped Forgings for use in the Petroleum and Natural Gas Industry | 2 | X | ||
| CSOEM | RP | 11AR | Recommended Practice for Care and Use of Subsurface Pumps | 5 | X | ||
| CSOEM | Spec | 11P | Specification for Packaged Reciprocating Compressors for Oil and Gas Production Services | 3 | X | ||
| CSOEM | RP | 2MET | Metocean Design and Operating Considerations | 2 | X | ||
| CSOEM | RP | 19GLHB | Gas Lift Handbook | 1 | X | ||
| CSOEM | Spec | 11E | Specification for Pumping Units | 20 | X | ||
| CSOEM | Spec | 15LF | Lay Flat Hose | 1 | X | ||
| CSOEM | RP | 15WT | Operations for Lay Flat Hose in Oilfield Water Applications | 1 | X | ||
| CSOEM | Spec | 19PT | Downhole Perforating Tools | 1 | X | ||
| CSOEM | Spec | 19G15 | Conventional Flow Control Devices | 1 | X | ||
| CSOEM | Std | 19C | Measurement of and Specifications for Proppants Used in Hydraulic Fracturing and Gravel-packing Operations | 3 | X | ||
| CSOEM | TR | 13TR1-A1 | Stress Corrosion Cracking of Corrosion Resistant Alloys in Halide Brines Exposed to Acidic Production Gas | 1 | X | ||
| CSOEM | Std | 20S | Qualification of Additively Manufactured Metallic Materials for Use in the Petroleum and Natural Gas Industries | 1 | X | ||
| CSOEM | Spec | 20F-A1 | Corrosion Resistant Bolting for Use in the Petroleum and Natural Gas Industries | 2 | X | ||
| CSOEM | Spec | 20E-A3 | Alloy and Carbon Steel Bolting for use in the Petroleum and Natural Gas Industries | 2 | X | ||
| CSOEM | Std | 20H | Heat Treatment Services - Batch Type for Equipment Used in the Petroleum and Natural Gas Industry | 2 | X | ||
| CSOEM | Spec | 20A-A2 | Carbon Steel, Alloy Steel, Stainless Steel, and Nickel Base Alloy Castings for Use in the Petroleum and Natural Gas Industry | 2 | X | ||
| CSOEM | RP | 11S1 | Recommended Practice for Electrical Submersible Pump Teardown Report | 4 | X | ||
| CSOEM | RP | 13B-2-A1 | Recommended Practice for Field Testing Oil-based Drilling Fluids (includes Errata 1 dated August 2014 and Errata 2 dated March 2018) | 5 | X | ||
| CSOEM | Spec | 11AX | Subsurface Sucker Rod Pump Assemblies, Components and Fittings | 14 | X | ||
| CSOEM | Spec | 19V-E1 | Subsurface Completion Isolation (Barrier) Valves and Related Equipment | 2 | X | ||
| CSOEM | Spec | 10A-A1 | Cements and Materials for Well Cementing | 25 | X | ||
| CSOEM | Spec | 17D-A2 | Specification for Subsea Wellhead and Christmas Tree Equipment | 2 | X | ||
| CSOEM | RP | 17Q-A1 | Recommended Practice on Subsea Equipment Qualification | 2 | X | ||
| CSOEM | RP | 17W | Recommended Practice for Subsea Capping Stacks | 2 | X | ||
| CSOEM | Spec | 6A-A1 | Specification for Wellhead and Tree Equipment | 21 | X | ||
| CSOEM | Std | 6AV2 | Installation, Maintenance and Repair of Surface Safety Vavles and Underwater Safety Valves Offshore(includes Errata 1, August 2014) | 2 | X | ||
| CSOEM | Std | 6FA | Standard for Fire Test for Valves | 5 | X | ||
| CSOEM | Spec | 20C | Closed Die Forgings for Use in the Petroleum and Natural Gas Industry | 3 | X | ||
| CSOEM | Std | 20J-A1 | Qualification of Distributors of Metallic Materials for Use in the Petroleum and Natural Gas Industries | 1 | X | ||
| DPOSC | RP | 2D-A1 | Operation and Maintenance of Offshore Cranes | 7 | X | ||
| CSOEM | TR | 2FR-1 | Study of Environmental Factor in API RP 2A-LRFD | 1 | X | ||
| CSOEM | Spec | 15S-E1-A1 | Spoolable Reinforced Plastic Line Pipe | 2 | X | ||
| CSOEM | RP | 10B-6-A1 | Recommended Practice on Determining the Static Gel Strength of Cement Formulations | 1 | X | ||
| CSOEM | Spec | Q1-E3 | Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry | 9 | X |
For the best experience, please view on full-size desktop
| Committee | Pub. Type | Pub. No | Title | Ed. | Date Published |
|---|---|---|---|---|---|
| COPM | Ch. | 11.1-A2 | Addendum 2 to Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils | 1 | 05/16/2019 |
| COPM | Ch. | 11.2.4 | Temperature Correction for the Volume of NGL and LPG Tables 23E, 24E, 53E, 59E, 60E | 2 | 06/03/2019 |
| COPM | Ch. | 11.3.3 | Miscellaneous Hydrocarbon Product Properties - Denatured Ethanol Density and Volume Correction Factors | 3 | 05/16/2019 |
| COPM | Ch. | 11.3.4 | Miscellaneous Hydrocarbon Properties - Denatured Ethanol and Gasoline Component Blend Densities and Volume Correction Factors | 1 | 05/16/2019 |
| COPM | Ch. | 12.1.1 | Calculation of Static Petroleum Quantities, Part 1—Upright Cylindrical Tanks and Marine Vessels | 4 | 02/14/2019 |
| COPM | Ch. | 15 | Guidelines for the Use of Petroleum Industry-specific International System (SI) Units | 4 | 06/11/2019 |
| COPM | Ch. | 17.5 | Guidelines for Cargo Analysis and Reconciliation | 4 | 07/23/2019 |
| COPM | Ch. | 17.9 | Vessel Experience Factor (VEF) | 3 | 07/23/2019 |
| COPM | Ch. | 19.6.2 | Evaporative Loss from the Cleaning of Storage Tanks | 1 | 09/03/2019 |
| COSFP | RP | 2001 | Fire Protection in Refineries | 10 | 07/15/2019 |
| CRE | RP | 581-A1 | Risk-Based Inspection Methodology | 3 | 04/05/2019 |
| CRE | RP | 588 | Recommended Practice for Source Inspection and Quality Surveillance of Fixed Equipment | 1 | 07/30/2019 |
| CRE | RP | 591 | Process Valve Qualification Procedure | 6 | 04/17/2019 |
| CRE | RP | 755 | Fatigue Prevention Guidelines for the Refining and Petrochemical Industries | 2 | 05/02/2019 |
| CRE | RP | 932-B | Design, Materials, Fabrication, Operation, and Inspection Guidelines for Corrosion Control in Hydroprocessing Reactor Effluent Air Cooler (REAC) Systems | 3 | 06/12/2019 |
| CRE | RP | 934-A | Materials and Fabrication of 2 1/4Cr-1Mo, 2 1/4Cr-1Mo-1/4V, 3Cr-1Mo, and 3Cr-1Mo-1/4V Steel Heavy Wall Pressure Vessels for High-temperature, High-pressure Hydrogen Service | 3 | 01/24/2019 |
| CRE | RP | 934-C | Materials and Fabrication of 1-1/4CR-1/2Mo Steel Heavy Wall Pressure Vessels for High-pressure Hydrogen Service Operating at or Below 825 Deg. F (440 Deg. C) | 2 | 02/22/2019 |
| CRE | RP | 939-C | Guidelines for Avoiding Sulfidation (Sulfidic) Corrosion Failures in Oil Refineries | 2 | 01/10/2019 |
| CRE | Spec | 12F | Specification for Shop Welded Tanks for Storage of Production Liquids | 13 | 01/11/2019 |
| CRE | Std | 530-A1 | Calculation of Heater-tube Thickness in Petroleum Refineries | 7 | 07/01/2019 |
| CRE | Std | 672 | Packaged, Integrally Geared Centrifugal Air Compressors for Petroleum, Chemical, and Gas Industry Services | 5 | 08/19/2019 |
| CSOEM | RP | 13B-1 | Field Testing Water-Based Drilling Fluids | 5 | 05/23/2019 |
| CSOEM | RP | 17H | Remotely Operated Tools and Interfaces on Subsea Production Systems | 3 | 07/23/2019 |
| CSOEM | RP | 17P | Recommended Practice for Subsea Structures and Manifolds | 2 | 01/31/2019 |
| CSOEM | RP | 19G5 | Operation, Maintenance, Surveillance and Troubleshooting of Gas-Lift Installations | 1 | 07/08/2019 |
| CSOEM | RP | 2A-LRFD | Planning, Designing, and Constructing Fixed Offshore Platforms - Load and Resistance Factor Design | 2 | 08/01/2019 |
| CSOEM | RP | 2EQ-A1 | Seismic Design Procedures and Criteria for Offshore Structures | 1 | 01/04/2019 |
| CSOEM | RP | 2FSIM | Floating Systems Integrity Management | 1 | 09/10/2019 |
| CSOEM | RP | 2MIM | Mooring Integrity Management | 1 | 09/10/2019 |
| CSOEM | RP | 2RIM | Integrity Management of Risers from Floating Production Facilities | 1 | 09/10/2019 |
| CSOEM | RP | 2TOP | Topsides Structure | 1 | 08/01/2019 |
| CSOEM | RP | 4G | Operation, Inspection, Maintenance, and Repair of Drilling and Well Servicing Structures | 5 | 02/28/2019 |
| CSOEM | RP | 67 | Oilfield Explosives Safety | 3 | 10/03/2019 |
| CSOEM | RP | 6AR | Repair and Remanufacture of Wellhead and Tree Equipment | 2 | 09/09/2019 |
| CSOEM | RP | 8B-A1 | Inspection, Maintenance, Repair, and Remanufacture of Hoisting Equipment | 8 | 03/19/2019 |
| CSOEM | Spec | 10A | Cements and Materials for Well Cementing | 25 | 03/21/2019 |
| CSOEM | Spec | 11AX-A1 | Subsurface Sucker Rod Pump Assemblies, Components and Fittings | 13 | 05/09/2019 |
| CSOEM | Spec | 11PL | Plunger Lift Lubricators and Related Equipment | 1 | 06/06/2019 |
| CSOEM | Spec | 13A | Drilling Fluid Materials | 19 | 10/10/2019 |
| CSOEM | Spec | 19CI | Downhole Chemical Injection Devices and Related Equipment | 1 | 06/14/2019 |
| CSOEM | Spec | 19G1 | Side-pocket Mandrels | 2 | 02/22/2019 |
| CSOEM | Spec | 19G2-A1 | Flow-control Devices for Side-pocket Mandrels | 1 | 01/09/2019 |
| CSOEM | Spec | 19LH | Liner Hanger Equipment | 1 | 06/18/2019 |
| CSOEM | Spec | 19V | Subsurface Completion Isolation (Barrier) Valves and Related Equipment | 2 | 05/14/2019 |
| CSOEM | Spec | 20E-A2 | Alloy and Carbon Steel Bolting for use in the Petroleum and Natural Gas Industries | 2 | 03/25/2019 |
| CSOEM | Spec | 2W | Steel Plates Produced by Thermo-Mechanically Controlled Processing (TMCP) for Offshore Structures | 6 | 01/04/2019 |
| CSOEM | Spec | 4F-A2 | Specification for Drilling and Well Servicing Structures | 4 | 05/01/2019 |
| CSOEM | Spec | 6DSS-A1 | Specification for Subsea Pipeline Valves | 3 | 04/19/2019 |
| CSOEM | Spec | 7-1-A4 | Specification for Rotary Drill Stem Elements | 1 | 02/14/2019 |
| CSOEM | Std | 20D | Qualification of Nondestructive Examination Services for Equipment used in the Petroleum and Natural Gas Industry | 2 | 08/13/2019 |
| CSOEM | Std | 20N | Heat Treatment Services - Continuous Furnace for Equipment Used in the Petroleum and Natural Gas Industry | 1 | 08/15/2019 |
| CSOEM | Std | 6ACRA-A3 | Age-Hardened Nickel-Based Alloys for Oil and Gas Drilling and Production Equipment | 1 | 02/04/2019 |
| CSOEM | Std | 6FB | Standard for Fire Test for End Connections | 4 | 05/20/2019 |
| CSOEM | Std | 6X | Design Calculations for Pressure-containing Equipment | 2 | 02/04/2019 |
| CSOEM | TR | 17TR8-A1 | High-Pressure High-Temperature Design Guidelines | 2 | 04/25/2019 |
| CSOEM | TR | 21TR1 | Materials Selection for Bolting | 1 | 08/12/2019 |
| DPOSC | RP | 54 | Occupational Safety and Health for Oil and Gas Well Drilling and Servicing Operations | 4 | 02/20/2019 |
| DPOSC | RP | 92P | Managed Pressure Drilling Operations — Pressurized Mud Cap Operations with Subsea Blowout Preventer | 1 | 06/05/2019 |
| DPOSC | RP | T-8 | Safety Training for Workers on Offshore Production Facilities | 1 | 01/21/2019 |
| GCM | API | 1509 | Engine Oil Licensing and Certification System | 18 | 07/10/2019 |
| GCOP | RP | 1160 | Managing System Integrity for Hazardous Liquid Pipelines | 3 | 02/27/2019 |
| GCOP | RP | 1161 | Pipeline Operator Qualification | 4 | 02/08/2019 |
| GCOP | RP | 1181 | Pipeline Operational Status Determination | 1 | 10/08/2019 |
| GCOP | TR | 1179 | Hydrostatic Testing as an Integrity Management Tool | 1 | 05/22/2019 |
