Below is a list of active API standards, recommended practices, equipment
specifications, and other technical documents that help the oil and natural gas industry safely,
efficiently, and responsibly supply energy to billions of people around the world.
Order single-user copies of API Standards from the API Publications Store
For the best experience, please view on full-size desktop
| Committee | Pub. Type | Pub. No. | Title | Ed. | Pre-Ballot Phase | Ballot Phase | In Editing |
|---|---|---|---|---|---|---|---|
| COSFP | RP | 2001 | Fire Protection in Refineries | 10 | x | ||
| COSFP | RP | 2009 | Safe Welding, Cutting and Hot Work Practices in the Petroleum and Petrochemical Industries | 8 | x | ||
| COSFP | RP | 2201 | Safe Hot Tapping Practices in the Petroleum and Petrochemical Industries | 6 | x | ||
| CRE | RP | 581-A1 | Risk-Based Inspection Methodology | 3 | x | ||
| CRE | Std | 672 | Packaged, Integrally Geared Centrifugal Air Compressors for Petroleum, Chemical, and Gas Industry Services | 5 | x | ||
| CRE | TR | 684 | Tutorial on the API Standard Paragraphs Covering Rotor Dynamics and Balance | 3 | x | ||
| CRE | RP | 751 | Safe Operation of Hydrofluoric Acid Alkylation Units | 5 | x | ||
| CRE | RP | 12R1 | Recommended Practice for Setting, Maintenance, Inspection, Operation, and Repair of Tanks in Production Service | 6 | x | ||
| .CRE | Std | 620-A3 | Design and Construction of Large, Welded, Low-Pressure Storage Tanks | 12 | x | ||
| CRE | Std | 625 | Tank Systems for Refrigerated Liquefied Gas Storage | 3 | x | ||
| CRE | Std | 625 | Addendum 3 to Tank Systems for Refrigerated Liquefied Gas Storage | 2 | x | ||
| CRE | Std | 650 | Welded Tanks for Oil Storage | 13 | x | ||
| CRE | Std | 653-A2 | Addendum 2 to Tank Inspection, Repair, Alteration and Reconstruction | 5 | x | ||
| CRE | Std | 685-A1 | Sealless Centrifugal Pumps for Petroleum, Petrochemical, and Gas Industry Services | 2 | x | ||
| CRE | RP | 500 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2 (includes Errata dated January 2014) | 4 | x | ||
| CRE | Std | 510 | Pressure Vessel Inspection Code | 10 | x | ||
| CRE | Std | 521 | Guide for Pressure-relieving and Depressuring Systems | 7 | x | ||
| CRE | Std | 527 | Seat Tightness of Pressure Relief Valves | 5 | x | ||
| CRE | Std | 530 | Calculation of Heater-tube Thickness in Petroleum Refineries | 8 | x | ||
| CRE | Std | 534 | Heat Recovery Steam Generators | 3 | x | ||
| CRE | Std | 535 | Burners for Fired Heaters in General Refinery Services | 4 | x | ||
| CRE | Std | 537-A1 | Addendum 1 to Flare Details for Petroleum, Petrochemical and Natural Gas Industries | 3 | x | ||
| CRE | Std | 538 | Industrial Fired Boilers for General Refinery Service | 2 | x | ||
| CRE | RP | 540 | Electrical Installations in Petroleum Processing Plants | 5 | x | ||
| CRE | Std | 546 | Brushless Synchronous Machines 500 kVA and Larger | 4 | x | ||
| CRE | RP | 552 | Transmission Systems | 2 | x | ||
| CRE | RP | 553 | Refinery Valves and Accessories for Control and Safety Instrumented Systems | 3 | x | ||
| CRE | RP | 554 Part 1 | Process Control Systems, Part 1: Process Control Systems Functions and Funtional Specification Development | 3 | x | ||
| CRE | RP | 554 Part 2 | Process Control Systems, Part 2: Process Control, System Design | 2 | x | ||
| CRE | RP | 554 Part 3 | Process Control Systems, Part 3: Project Execution and Process Control System Ownership | 2 | x | ||
| CRE | API | 555 | Process Analyzers | 4 | x | ||
| CRE | RP | 556 | Instrumentation, Control, and Protective Systems for Gas Fired Heaters | 3 | x | ||
| CRE | Std | 561 | Reforming Furnaces for Hydrogen and Syngas Production | 1 | x | ||
| CRE | Std | 565 | Thermal Reactors in Sulfur Recovery Units for General Refinery Service | 1 | x | ||
| CRE | RP | 571 | Damage Mechanisms Affecting Fixed Equipment in the Refining Industry | 3 | x | ||
| CRE | RP | 572 | Inspection Practices for Pressure Vessels | 5 | x | ||
| CRE | RP | 573 | Inspection of Fired Boilers and Heaters | 4 | x | ||
| CRE | RP | 575 | Inspection of Atmospheric & Low Pressure Storage Tanks | 4 | x | ||
| CRE | RP | 577 | Welding Processes, Inspection, and Metallurgy | 3 | x | ||
| CRE | RP | 578 | Material Verification Program for New and Existing Alloy Piping Systems | 4 | x | ||
| CRE | RP | 582 | Welding Guidelines for the Chemical, Oil, and Gas Industries | 4 | x | ||
| CRE | RP | 583 | Corrosion Under Insulation and Fireproofing | 2 | x | ||
| CRE | RP | 584 | Integrity Operating Windows | 2 | x | ||
| CRE | RP | 585 | Pressure Equipment Integrity Incident Investigation | 2 | x | ||
| CRE | RP | 591 | Process Valve Qualification Procedure | 6 | x | ||
| CRE | RP | 599 | Metal Plug Valves - Flanged and Butt-welding Ends, Bolted Bonnets | 8 | x | ||
| CRE | Std | 600 | Steel Gate Valves - Flanged and Butt-welding Ends, Bolted Bonnets | 14 | x | ||
| CRE | Std | 602 | Gate, Globe, and Check Valves for Sizes DN 100 (NPS 4) and Smaller for the Petroleum and Natural Gas Industries | 11 | x | ||
| CRE | Std | 608 | Metal Ball Valves--Flanged, Threaded and Butt-Welding Ends | 6 | x | ||
| CRE | Std | 610 | Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries | 12 | x | ||
| CRE | Std | 611 | General Purpose Steam Turbines for Petroleum, Chemical, and Gas Industry Services | 6 | x | ||
| CRE | Std | 612 | Petroleum, petrochemical and natural gas industries—Steam turbines—Special-purpose applications | 8 | x | ||
| CRE | Std | 613 | Special Purpose Gear Units for Petroleum, Chemical and Gas Industry Services | 6 | x | ||
| CRE | Std | 614 | Lubrication, Shaft-Sealing, and Control-Oil Systems and Auxiliaries for Petroleum, Chemical and Gas Industry Services | 6 | x | ||
| CRE | RP | 615 | Valve Selection Guide | 3 | x | ||
| CRE | Std | 616 | Gas Turbines for the Petroleum, Chemical and Gas Industry Services | 6 | x | ||
| CRE | Std | 617 | Axial and Centrifugal Compressors and Expander-compressors for Petroleum, Chemical and Gas Industry Services | 9 | x | ||
| CRE | Std | 618 | Reciprocating Compressors for Petroleum, Chemical and Gas Industry Services | 6 | x | ||
| CRE | Std | 623 | Steel Globe Valves—Flanged and Butt-welding Ends, Bolted Bonnets | 2 | x | ||
| CRE | Std | 624 | Type Testing of Rising Stem Valves Equipped with Flexible Graphite Packing for Fugitive Emissions | 2 | x | ||
| CRE | RP | 651 | Cathodic Protection of Aboveground Storage Tanks | 5 | x | ||
| CRE | RP | 652 | Linings of Aboveground Petroleum Storage Tank Bottoms | 5 | x | ||
| CRE | TR | 654 | Caulking or Sealing the Bottom Edge Projection to the Foundation | 1 | x | ||
| CRE | Std | 660 | Shell-and-Tube Heat Exchangers | 10 | x | ||
| CRE | Std | 661 | Petroleum, Petrochemical, and Natural Gas Industries—Air-Cooled Heat Exchangers for General Refinery Service | 8 | x | ||
| CRE | Std | 663 | Hairpin-Type Heat Exchangers | 2 | x | ||
| CRE | Std | 664 | Spiral Plate Heat Exchangers | 2 | x | ||
| CRE | Std | 667 | Plate and Frame Heat Exchangers for General Refinery Services (Formerly Std. 662, Part 1) | 1 | x | ||
| CRE | Std | 669 | Heat Recovery Systems | 1 | x | ||
| CRE | Std | 671 | Special Purpose Couplings for Petroleum, Chemical and Gas Industry Services | 5 | x | ||
| CRE | Std | 673 | Centrifugal Fans for Petroleum, Chemical and Gas Industry Services | 4 | x | ||
| CRE | Std | 676 | Positive Displacement Pumps - Rotary | 4 | x | ||
| CRE | Std | 677 | General Purpose Gears, Slow Speed (Extruder) gears, and Epicyclic gear units for Petroleum, Chemical, and Gas Industry Services | 4 | x | ||
| CRE | Std | 681 | Liquid Ring Vacuum Pumps and Compressors | 2 | x | ||
| CRE | Std | 682 | Pumps—Shaft Sealing Systems for Centrifugal and Rotary Pumps | 5 | x | ||
| CRE | Std | 685 | Sealless Centrifugal Pumps for Petroleum, Petrochemical, and Gas Industry Services | 3 | x | ||
| CRE | RP | 686 | Machinery Installation and Installation Design | 3 | x | ||
| CRE | RP | 687 | Rotor Repair | 2 | x | ||
| CRE | RP | 688 | Pulsation and Vibration Control in Positive Displacement Machinery Systems for Petroleum, Petrochemical, and Natural Gas Industry Services | 2 | x | ||
| CRE | Std | 697 | Pump Repair | 1 | x | ||
| CRE | RP | 755 | Fatigue Prevention Guidelines for the Refining and Petrochemical Industries | 2 | x | ||
| CRE | Std | 810 | Welded Plate-Block Heat Exchangers | 1 | x | ||
| CRE | RP | 941 | Steels for Hydrogen Service at Elevated Temperatures and Pressures in Petroleum Refineries and Petrochemical Plants | 9 | x | ||
| CRE | TR | 941-A1 | Addendum 1 to the Technical Basis Document for API RP 941 | 1 | x | ||
| CRE | RP | 945 | Avoiding Environmental Cracking in Amine Units | 4 | x | ||
| CRE | Std | 975 | Refractory Installation Quality Control – Inspection and Testing of Refractory Brick Systems and Materials | 1 | x | ||
| CRE | TR | 978 | Monolithic Refractories: Manufacture, Properties and Selection | 1 | x | ||
| CRE | TR | 981 | Comparison of ASTM C832 and DIN EN 993-9 | 1 | x | ||
| CRE | Std | 2000 | Venting Atmospheric and Low-pressure Storage Tanks | 8 | x | ||
| CRE | RP | 2350 | Overfill Protection for Storage Tanks in Petroleum Facilities | 5 | x | ||
| CRE | RP | 2510 | Design and Construction of LPG Installations | 9 | x | ||
| CRE | Spec | 12B | Specification for Bolted Tanks for Storage of Production Liquids | 17 | x | ||
| CRE | Std | 520 Pt 1 | Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries--Part 1, Sizing and Selection | 10 | x | ||
| CRE | Std | 520 Pt 2 | Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries, Part II, & Installation | 7 | x | ||
| CRE | Std | 560-A1 | Addendum 1 to Fired Heaters for General Refinery Services | 5 | x | ||
| CRE | RP | 932-B | Design, Materials, Fabrication, Operation, and Inspection Guidelines for Corrosion Control in Hydroprocessing Reactor Effluent Air Cooler (REAC) Systems | 3 | x | ||
| CRE | RP | 934-C | Materials and Fabrication of 1-1/4CR-1/2Mo Steel Heavy Wall Pressure Vessels for High Pressure Hydrogen Service Operating at or Below 825 Deg. F (441 Deg. C) | 2 | x | ||
| CRE | RP | 934-F | Minimum Pressurization Temperatures, MPT, for Heavy Wall Pressure Vessels | 1 | x | ||
| CRE | TR | 934-H | Maintenance and Inspection of 2-1/4Cr-1Mo and 2-1/4Cr-1Mo-V Steel Pressure Vessels in High Pressure, High Temperature Hydrogen-Containing Service | 1 | x | ||
| CRE | TR | 934-J | Coke Drum Repair | 1 | x | ||
| GCM | RP | 1595 | Design, Construction, Operation, Maintenance & Inspection of Aviation Pre-Airfield Storage Terminals | 3 | x | ||
| GCM | RP | 1604 | Closure of Underground Petroleum Storage Tanks | 4 | x | ||
| GCM | RP | 1637 | Using the API Color-Symbol System to Mark Equipment and Vehicles for Product Identification at Gasoline Dispensing Facilities and Distribution Terminals. | 4 | x |
For the best experience, please view on full-size desktop
| Committee | Pub. Type | Pub. No. | Title | Ed. | Pre-Ballot Phase | Ballot Phase | In Editing |
|---|---|---|---|---|---|---|---|
| COPM | Ch. | 11.2.4 | Temperature Correction for the Volume of NGL and LPG Tables 23E, 24E, 53E, 59E, 60E | 2 | x | ||
| COPM | Ch. | 14.3.4 | Concentric, Square-Edged Orifice Meters, Part 4—Background, Development, Implementation Procedures and Subroutine Documentation | 4 | x | ||
| COPM | Ch. | 4.2 | Displacement Provers | 4 | x | ||
| COPM | Ch. | 4.6 | Pulse Interpolation | 3 | x | ||
| COPM | Ch. | 4.8 | Operation of Proving Systems | 3 | x | ||
| COPM | Ch. | 5.6 | Measurement of Liquid Hydrocarbons by Coriolis Meters | 2 | x | ||
| COPM | Ch. | 5.8 | Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters | 3 | x | ||
| COPM | Ch. | 8.3 | Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products | 2 | x | ||
| COPM | Ch. | 10.7 | Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration (ANSI/ASTM D4377) | 3 | x | ||
| COPM | Ch. | 12.2 | Calculation of Liquid Petroleum Quantities Measured by Turbine or Displacement Meters (incorporates Chapters 12.2.1, 12.2.2, 12.2.3, 12.2.4 and 12.2.5) | 2 | x | ||
| COPM | Ch. | 14.10 | Measurement of Flow to Flares | 2 | x | ||
| COPM | Ch. | 15.2 | Guidelines for the Use of Petroleum Industry Specific International System (SI) Units | 1 | x | ||
| COPM | Ch. | 17.14 Part 1 | Measurement of Bulk Cargoes by Draft Survey Part 1: Ocean Going Vessels | 1 | x | ||
| COPM | Ch. | 17.2 | Measurement of Cargoes on Board Tank Vessels | 3 | x | ||
| COPM | Ch. | 17.5 | Guidelines for Cargo Analysis and Reconciliation | 4 | x | ||
| COPM | Ch. | 17.9 | Vessel Experience Factor (VEF) | 3 | x | ||
| COPM | Ch. | 19.2 | Evaporative Loss from Floating-Roof Tanks (previously Publications 2517 and 2519) | 4 | x | ||
| COPM | Ch. | 20.1 | Production Measurement and Allocation Systems | 2 | x | ||
| COPM | Ch. | 20.3 | Measurement of Multiphase Flow | 2 | x | ||
| COPM | Ch. | 21.2 | Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters | 2 | x | ||
| COPM | Ch. | 22.1 | Testing Protocols—General Guidelines for Developing Testing Protocols for Devices Used in the Measurement of Hydrocarbon Fluids- Addendum 1 | 2 | x | ||
| COPM | Ch. | 22.5 | Testing Protocols & Electronic Flow Computer Calculations | 1 | x | ||
| COPM | Ch. | 23.2 | Reconciliation of Liquid Pipeline Quantities | 1 | x | ||
| COPM | Std | 2554 | Measurement and Calibration of Tank Cars | 2 | x | ||
| COPM | TR | 2571 | Fuel Gas Measurement | 2 | x | ||
| COPM | Ch. | 11.1-A2 | Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils(includes Addendum dated September 2007) - Addendum 2 | 2 | x | ||
| COPM | Ch. | 11.3.3 | Miscellaneous Hydrocarbon Product Properties - Denatured Ethanol Density and Volume Correction Factors | 3 | x | ||
| COPM | Ch. | 11.3.4 | Gasoline/Ethanol Volume Correction Factors | 1 | x | ||
| COPM | Ch. | 11.4.1 | Properties of Reference Materials, Part 1 - Density of Water and Water Volume Correction factors for Calibration of Volumetric Provers | 2 | x | ||
| COPM | Ch. | 12.4.1 | Calculation of Petroleum – Base Prover Quantity Calibration – Waterdraw Method | 1 | x | ||
| COPM | Ch. | 12.4.2 | Calculation of Petroleum – Base Prover Quantity Calibration – Master Meter Method | 1 | x | ||
| COPM | Ch. | 12.4.3 | Calculation of Petroleum – Prover Quantity Calibration – Gravimetric Method | 1 | x | ||
| COPM | Ch. | 17.14.2 | Measurement of Bulk Cargoes by Draft Survey Part 2: Inland Barges | 1 | x | ||
| COPM | Ch. | 19.6.2 | Evaporative Loss from the Cleaning of Storage Tanks | 1 | x | ||
| COPM | Ch. | 2.2A | Measurement and Calibration of Upright Cylindrical Tanks by the Manual Strapping Method | 2 | x | ||
| COPM | Ch. | 4.9.1 | Methods of Calibration for Displacement and Volumetric Tank Provers, Part 1—Introduction to the Determination of the Volume of Displacement and Tank Provers | 2 | x | ||
| COPM | Ch. | 6.1A | Liquid Flow Measurement Systems for Single Phase Liquids – General Considerations | 1 | x | ||
| COPM | Ch. | 6.2A | Truck and Rail Loading/Unloading Measurement Systems | 1 | x | ||
| COPM | Ch. | 6.3A | Pipeline and Marine Loading and Unloading Measurement Systems | 1 | x | ||
| COPM | TR | 2580 | Documentation Report and Data Files for: API MPMS Chapter 11.3.3 and API MPMS Chapter 11.3.4 | 1 | x | ||
| COPM | Ch. | 14.1 | Collecting and Handling of Natural Gas Samples for Custody Transfer | 8 | x | ||
| COPS | RP | 80 | Definition of Onshore Gas Gathering Lines | 2 | x | ||
| COPS | Std | 1160 | Managing System Integrity for Hazardous Liquid Pipelines | 3 | x | ||
| COPS | RP | 1161 | Pipeline Operator Qualification | 4 | x | ||
| COPS | RP | 1162 | Public Awareness Programs for Pipeline Operators | 3 | x | ||
| COPS | Std | 1163 | In-line Inspection Systems Qualification | 3 | x | ||
| COPS | Std | 1164 | Pipeline SCADA Security | 3 | x | ||
| COPS | RP | 1165 | Pipeline SCADA Displays | 2 | x | ||
| COPS | RP | 1169 | Basic Inspection Requirements—New Pipeline Construction | 2 | x | ||
| COPS | RP | 1170 | Design and Operation of Solution-Mined Salt Caverns Used for Natural Gas Storage | 2 | x | ||
| COPS | RP | 1171 | Functional Integrity of Natural Gas Storage in Depleted Hydrocarbon Reservoirs and Aquifer Reservoirs | 2 | x | ||
| COPS | TR | 1179 | Hydrostatic Testing as an Integrity Management Tool | 1 | x | ||
| COPS | RP | 1181 | Pipeline Operational Status | 1 | x | ||
| COPS | RP | 1182 | Safety Provisions for Large Diameter Onshore Gas Gathering Lines | 1 | x | ||
| COPS | RP | 1183 | Assessment and Measurement of Dents | 1 | x | ||
| COPS | RP | 2611 | Terminal Piping Inspection - Inspection of In-Service Terminal Piping Systems | 2 | x |
For the best experience, please view on full-size desktop
| Committee | Pub. Type | Pub. No. | Title | Ed. | Pre-Ballot Phase | Ballot Phase | In Editing |
|---|---|---|---|---|---|---|---|
| CSOEM | Spec | 2C | Offshore Pedestal-Mounted Cranes | 8 | x | ||
| CSOEM | RP | 2A-LRFD | Planning, Designing, and Constructing Fixed Offshore Platforms – Load Resistance Factor Design | 2 | x | ||
| CSOEM | RP | 2MET | Deprivation of Metocean Design and Operating Conditions | 2 | x | ||
| CSOEM | RP | 2SK | Design and Analysis of Stationkeeping Systems for Floating Structures | 4 | x | ||
| CSOEM | RP | 2TOP | Topsides Structure | 1 | x | ||
| CSOEM | RP | 4G | Operation, Inspection, Maintenance, and Repair of Drilling and Well Servicing Structures | 5 | |||
| CSOEM | Spec | 7HU2 | Hammer Unions | 1 | x | ||
| CSOEM | Spec | 7K | Drilling and Well Servicing Equipment | 6 | x | ||
| CSOEM | RP | 7L | Procedures for Inspection, Maintenance, Repair, and Remanufacture of Drilling Equipment | 2 | x | ||
| CSOEM | Spec | 8C | Drilling and production Hoisting Equipment (PSL 1 and PSL 2) | 6 | x | ||
| CSOEM | Spec | 12J | Oil and Gas Separators | 9 | x | ||
| CSOEM | RP | 13J | Testing of Heavy Brines | 5 | x | ||
| CSOEM | RP | 17Q | Recommended Practice on Subsea Equipment Qualification | 2 | x | ||
| CSOEM | RP | 19D | Measuring the Long-Term Conductivity of Proppants | 2 | x | ||
| CSOEM | RP | 19G5 | Operation, Maintenance, Surveillance and Troubleshooting of Gas-Lift Installations | 1 | x | ||
| CSOEM | RP | 19GLHB | Gas-lift Handbook | 1 | x | ||
| CSOEM | Bull | E3 | Well Abandonment and Decommissioning | 2 | x | ||
| CSOEM | Std | 53 | Blowout Prevention Equipment Systems for Drilling Wells | 5 | x | ||
| CSOEM | Std | 53 | Blowout Prevention Equipment Systems for Drilling Wells | 5 | x | ||
| CSOEM | RP | 67 | Oilfield Explosives Safety | 3 | x | ||
| CSOEM | Std | 1104 | Welding of Pipelines and Related Facilities | 22 | x | ||
| CSOEM | Spec | 10A | Specification for Cements and Materials for Well Cementing | 25 | x | ||
| CSOEM | Spec | 10D | Bow-Spring Casing Centralizers | 7 | x | ||
| CSOEM | RP | 11AR | Recommended Practice for Care and Use of Subsurface Pumps | 5 | x | ||
| CSOEM | Spec | 11B | Sucker Rods | 28 | x | ||
| CSOEM | Spec | 11D1 | Packers and Bridge Plugs | 4 | x | ||
| CSOEM | Spec | 11E | Specification for Pumping Units (includes Errata dated August 2015) | 20 | x | ||
| CSOEM | Spec | 11P | Specification for Packaged Reciprocating Compressors for Oil and Gas Production Services | 3 | x | ||
| CSOEM | Spec | 11PL | Plunger Lift | 1 | x | ||
| CSOEM | Spec | 13A | Drilling Fluid Materials | 19 | x | ||
| CSOEM | RP | 13B-1 | Field Testing Water-Based Drilling Fluids | 5 | x | ||
| CSOEM | RP | 13B-2 | Field Testing Oil-Based Drilling Fluids | 6 | x | ||
| CSOEM | RP | 13C | Drilling Fluid Processing systems Evaluation | 6 | x | ||
| CSOEM | RP | 13I | Laboratory Testing of Drilling Fluids | 9 | x | ||
| CSOEM | RP | 13K | Chemical Analysis of Barite | 4 | x | ||
| CSOEM | TR | 13M6 | Measuring Leakoff of Completion Fluids Under Dynamic Conditions | 1 | x | ||
| CSOEM | Spec | 14A-A2 | Subsurface Safety Valve Equipment | 12 | x | ||
| CSOEM | Spec | 14L | Specification for Lock Mandrels and Landing Nipples | 3 | x | ||
| CSOEM | Std | 15LE | Polyethylene (PE) Line Pipe | 5 | x | ||
| CSOEM | RP | 15WT | Lay Flat Hose | 1 | x | ||
| CSOEM | Spec | 15LH | Lay Flat Hose | 1 | x | ||
| CSOEM | Spec | 15S | Spoolable Reinforced Plastic Line Pipe | 2 | x | ||
| CSOEM | Spec | 16A | Drill Through Equipment | 4 | x | ||
| CSOEM | Std | 16AR | Repair and Remanufacture of Drill-Through Equipment | 1 | x | ||
| CSOEM | Spec | 16B | Blowout Prevention Equipment for Wireline, Coil Tubing and Polished Rod Application | 1 | x | ||
| CSOEM | Spec | 16C | Choke and Kill Equipment | 3 | x | ||
| CSOEM | Spec | 16F | Marine Drilling Riser Equipment | 2 | x | ||
| CSOEM | Spec | 16RCD | Specification for Rotating Control Devices | 3 | x | ||
| CSOEM | RP | 16ST | Coiled Tubing Well Control Equipment Systems | 2 | x | ||
| CSOEM | Spec | 17D | Specification for Subsea Wellhead and Tree Equipment | 3 | x | ||
| CSOEM | 17G | 3 | x | ||||
| CSOEM | Std | 17G1 | System Configuration and Operation of Subsea Well Intervention Systems | 1 | x | ||
| CSOEM | RP | 17G2 | Recommended Practice for Subsea Pumping Well Intervention Systems | 1 | x | ||
| CSOEM | RP | 17G3 | Recommended Practice for Subsea Well Intervention Systems Using Non-Ferrous Alloys | 1 | x | ||
| CSOEM | RP | 17G4 | Recommended Practice for Subsea Riserless Light Well Intervention Systems | 1 | x | ||
| CSOEM | RP | 17G5 | Recommended Practice for Intervention Workover Control Systems (IWOCS) | 1 | x | ||
| CSOEM | RP | 17H | Recommended Practice for Remotely Operated Tools and Interfaces on Subsea Production Systems | 3 | x | ||
| CSOEM | RP | 17X | Subsea Pump Module Systems | 1 | x | ||
| CSOEM | RP | 17Y | Subsea Chemical Injection | 1 | x | ||
| CSOEM | RP | 19B | Evaluation of Well Perforators | 3 | x | ||
| CSOEM | Spec | 19CI | Downhole Chemical Injection Devices and Related Equipment | 1 | x | ||
| CSOEM | Spec | 19G1 | Side-pocket Mandrels | 2 | x | ||
| CSOEM | TR | 19G12 | Gas Lift Surveillance, Automation and Control Systems | 1 | x | ||
| CSOEM | RP | 19G13 | Challenging Gas-lift Applications | 1 | x | ||
| CSOEM | Spec | 19G2 | Flow-control Devices for Side-pocket Mandrels | 2 | x | ||
| CSOEM | Spec | 19ICD | Inflow Control Devices | 1 | x | ||
| CSOEM | Spec | 19ICV | Interval Control Valves | 1 | x | ||
| CSOEM | Spec | 19LH | Liner Hanger Equipment | 1 | x | ||
| CSOEM | Spec | 19PT | Downhole Perforating | 1 | x | ||
| CSOEM | Spec | 19V | Subsurface Barrier Valves and Related Equipment | 2 | x | ||
| CSOEM | Spec | 19XXXX | Conventional Flow Control Devices | 1 | x | ||
| CSOEM | Spec | 20B | Open Die Shaped Forgings for use in the Petroleum and Natural Gas Industry | 2 | x | ||
| CSOEM | Spec | 20D | Nondestructive Examination Services for Equipment used in the Petroleum and Natural Gas Industry | 2 | x | ||
| CSOEM | Spec | 20E-A2 | Alloy and Carbon Steel Bolting for Use in the Petroleum and Natural Gas Industries | 2 | x | ||
| CSOEM | Std | 20G | Qualification of Welding Suppliers for Equipment Used in the Petroleum and Natural Gas Industry | 1 | x | ||
| CSOEM | Std | 20N | Heat Treatment Services - Continuous Furnace for Equipment Used in the Petroleum and Natural Gas Industry | 1 | x | ||
| CSOEM | Std | 20P | Qualification of Suppliers for Plating and Coating used in the Petroleum and Natural Gas Industries | 1 | x | ||
| CSOEM | Std | 20R | Qualification of Suppliers of Subsurface Electronics for Use in the Petroleum and Natural Gas Industries | 1 | x | ||
| CSOEM | TR | 21TR1 | Material Selection for Bolting | 1 | x | ||
| CSOEM | Spec | 2B | Structural Steel Pipe | 7 | x | ||
| CSOEM | RP | 2FSIM | Floating Systems Integrity Management | 1 | x | ||
| CSOEM | RP | 2MIM | Mooring Integrity Management | 1 | x | ||
| CSOEM | RP | 2RIM | Integrity Management of Risers from Floating Production Systems | 1 | x | ||
| CSOEM | Spec | 4F | Drilling and Well Servicing Structures | 4 | x | ||
| CSOEM | RP | 4G | Operation, Inspection, Maintenance, and Repair of Drilling and Well Servicing Structures | 4 | x | ||
| CSOEM | RP | 5A3 | Thread Compounds for Casing, Tubing, Line Pipe and Drill Stem Elements | 4 | x | ||
| CSOEM | Spec | 5B | Threading, Gauging, and Thread Inspection of Casing, Tubing, and Line Pipe Threads | 17 | x | ||
| CSOEM | RP | 5B1 | Gauging and Inspection of Casing, Tubing and Line Pipe Threads | 6 | x | ||
| CSOEM | Spec | 5B-A1 | Threading, Gauging, and Thread Inspection of Casing, Tubing, and Line Pipe Threads | 16 | x | ||
| CSOEM | Spec | 5DP | Drill Pipe | 2 | x | ||
| CSOEM | RP | 5L8 | Field Inspection Practice of New Line Pipe | 3 | x | ||
| CSOEM | RP | 65-3 | Well Abondonment Practices | 1 | x | ||
| CSOEM | TR | 6AF3 | HPHT Flanges for Wellhead and Christmas Tree Equipment Surface Equipment | 1 | x | ||
| CSOEM | RP | 6AR | Repair and Remanufacture of Wellhead and Christmas Tree Equipment | 2 | x | ||
| CSOEM | Spec | 6D | Specification for Pipeline Valves | 25 | x | ||
| CSOEM | Std | 6DHP | Pipeline Valves for High Pressure Service | 1 | x | ||
| CSOEM | Std | 6DSSX | Standard for Actuator Sizing and Mounting Kits for Subsea Pipeline Valves | 1 | x | ||
| CSOEM | Std | 6DX | Standard for Actuator Sizing and Mounting Kits for Pipeline Valves | 2 | x | ||
| CSOEM | Spec | 6FB | Specification for Fire Test for End Connections | 4 | x | ||
| CSOEM | Spec | 6FD | Specification for Fire Test for Check Valves | 2 | x | ||
| CSOEM | RP | 6RT | Recommended Practice for Running Tools | 1 | x | ||
| CSOEM | Spec | 7-1 | Rotary Drill Stem Elements | 2 | x | ||
| CSOEM | Spec | 7-2-A1 | Threading and Gauging of Rotary Shouldered Connections | 2 | x | ||
| CSOEM | RP | 7G-2 | Inspection and Classification of Used Drill Stem Elements | 2 | x | ||
| CSOEM | Spec | 7HU2 | Hammer Unions | 1 | x | ||
| CSOEM | Spec | 7K | Equipment Procedures for Inspection, Maintenance, Repair, and Remanufacture of Drilling Equipment | 6 | x | ||
| CSOEM | RP | 7L | Inspection, Maintenance, Repair, and Remanufacture of Drilling Equipment | 2 | x | ||
| CSOEM | Spec | 8C | Drilling and Production Hoisting Equipment (PSL 1 and PSL 2) | 6 | x | ||
| CSOEM | Spec | Q1 | Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry | 10 | x | ||
| CSOEM | Spec | Q2 | Specification for Quality Management System Requirements for Service Supply Organizations for the Petroleum and Natural Gas Industries | 2 | x | ||
| DPOSC | RP | 2D-2 | Offshore Crane Operator Training | 1 | x | ||
| DPOSC | RP | 75 | Development of a Safety and Environmental Management Program for Offshore Operations and Facilities | 4 | x | ||
| DPOSC | Bull | 4565 | Habitat Conservation Practices | 1 | x | ||
| DPOSC | RP | 54 | Occupational Safety for Oil and Gas Well Drilling and Servicing Operations | 4 | x | ||
| DPOSC | RP | 78 | Wellbore Positioning | 1 | x | ||
| DPOSC | RP | 90-1 | Annular Casing Pressure Management for Offshore WellsAnnular Casing Pressure Management for Offshore Wells | 2 | x | ||
| DPOSC | RP | 92C | Controlled Mud Level Managed Pressure Drilling Operations | 1 | x | ||
| DPOSC | RP | 92P | Pressurized Mud Cap Operations for Rigs with Subsea BOP Systems | 1 | x | ||
| DPOSC | RP | 100-1 | Hydraulic Fracturing -- Well Integrity and Fracture Containment | 2 | x |
For the best experience, please view on full-size desktop..
| Committee | Pub. Type | Pub. No | Title | Ed. | Date Published |
|---|---|---|---|---|---|
| CRE | RP | 934-A | Materials and Fabrication of 2 1/4Cr-1Mo, 2 1/4Cr-1Mo-1/4V, 3Cr-1Mo, and 3Cr-1Mo-1/4V Steel Heavy Wall Pressure Vessels for High-temperature, High-pressure Hydrogen Service | 3 | 01/24/2019 |
| CRE | RP | 939-C | Guidelines for Avoiding Sulfidation (Sulfidic) Corrosion Failures in Oil Refineries | 2 | 01/10/2019 |
| CRE | Spec | 12F | Specification for Shop Welded Tanks for Storage of Production Liquids | 13 | 01/11/2019 |
| CSOEM | RP | 2EQ-A1 | Seismic Design Procedures and Criteria for Offshore Structures |
1 | 01/04/2019 |
| CSOEM | Spec | 2W | Steel Plates Produced by Thermo-Mechanically Controlled Processing (TMCP) for Offshore Structures | 6 | 01/04/2019 |
| DPOSC | RP | T-8 | Safety Training for Workers on Offshore Production Facilities | 1 | 01/21/2019 |
| CSOEM | Spec | 19G2-A1 | Flow-control Devices for Side-pocket Mandrels | 1 | 01/09/2019 |
| COPM | Ch. | 12.1.1 |
Calculation of Static Petroleum Quantities, Part 1 -- Upright Cylindrical Tanks and Marine Vessels | 4 | 02/14/2019 |
| CSOEM | Spec | 7-1-A4 | Specification for Rotary Drill Stem Elements | 1 | 02/14/2019 |
| CSOEM | RP | 17P | Recommended Practice for Subsea Structures and Manifolds | 2 | 01/31/2019 |
| CSOEM | Std | 6ACRA-A3 | Age-Hardened Nickel-Based Alloys for Oil and Gas Drilling and Production Equipment | 1 | 02/04/2019 |
| CSOEM | Std | 6X | Design Calculations for Pressure-containing Equipment | 2 | 02/04/2019 |
| GCOP | RP | 1161 | Pipeline Operator Qualification | 4 | 02/08/2019 |
For the best experience, please view on full-size desktop..
| Committee | Pub. Type | Pub. No | Title | Ed. | Date Published |
|---|---|---|---|---|---|
| CRE | RP | 934-A | Materials and Fabrication of 2 1/4Cr-1Mo, 2 1/4Cr-1Mo-1/4V, 3Cr-1Mo, and 3Cr-1Mo-1/4V Steel Heavy Wall Pressure Vessels for High-temperature, High-pressure Hydrogen Service | 3 | 01/24/2019 |
| CRE | RP | 939-C | Guidelines for Avoiding Sulfidation (Sulfidic) Corrosion Failures in Oil Refineries | 2 | 01/10/2019 |
| CRE | Spec | 12F | Specification for Shop Welded Tanks for Storage of Production Liquids | 13 | 01/11/2019 |
| CSOEM | RP | 2EQ-A1 | Seismic Design Procedures and Criteria for Offshore Structures |
1 | 01/04/2019 |
| CSOEM | Spec | 2W | Steel Plates Produced by Thermo-Mechanically Controlled Processing (TMCP) for Offshore Structures | 6 | 01/04/2019 |
| DPOSC | RP | T-8 | Safety Training for Workers on Offshore Production Facilities | 1 | 01/21/2019 |
| CSOEM | Spec | 19G2-A1 | Flow-control Devices for Side-pocket Mandrels | 1 | 01/09/2019 |
| COPM | Ch. | 12.1.1 |
Calculation of Static Petroleum Quantities, Part 1 -- Upright Cylindrical Tanks and Marine Vessels | 4 | 02/14/2019 |
| CSOEM | Spec | 7-1-A4 | Specification for Rotary Drill Stem Elements | 1 | 02/14/2019 |
| CSOEM | RP | 17P | Recommended Practice for Subsea Structures and Manifolds | 2 | 01/31/2019 |
| CSOEM | Std | 6ACRA-A3 | Age-Hardened Nickel-Based Alloys for Oil and Gas Drilling and Production Equipment | 1 | 02/04/2019 |
| CSOEM | Std | 6X | Design Calculations for Pressure-containing Equipment | 2 | 02/04/2019 |
| GCOP | RP | 1161 | Pipeline Operator Qualification | 4 | 02/08/2019 |
